Ticket #5728: r7800_r31277-dmesg.txt

File r7800_r31277-dmesg.txt, 21.5 KB (added by tatsuya46, 6 weeks ago)
Line 
1[    0.000000] Booting Linux on physical CPU 0x0
2[    0.000000] Linux version 3.18.47 (root@seg-desktop) (gcc version 6.1.0 (LEDE GCC 6.1.0 r1009) ) #121 SMP PREEMPT Sun Jan 29 23:04:20 CET 2017
3[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
4[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
5[    0.000000] Machine model: Netgear R7800 Nighthawk X4S
6[    0.000000] Memory policy: Data cache writealloc
7[    0.000000] On node 0 totalpages: 122368
8[    0.000000] free_area_init_node: node 0, pgdat c071e800, node_mem_map dd940000
9[    0.000000]   Normal zone: 956 pages used for memmap
10[    0.000000]   Normal zone: 0 pages reserved
11[    0.000000]   Normal zone: 122368 pages, LIFO batch:31
12[    0.000000] PERCPU: Embedded 9 pages/cpu @dddd0000 s7552 r8192 d21120 u36864
13[    0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096
14[    0.000000] pcpu-alloc: [0] 0 [0] 1
15[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121412
16[    0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd root=/dev/mtdblock6
17[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
18[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
19[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
20[    0.000000] Memory: 479164K/489472K available (3854K kernel code, 279K rwdata, 1104K rodata, 184K init, 403K bss, 10308K reserved, 0K highmem)
21[    0.000000] Virtual kernel memory layout:
22[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
23[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
24[    0.000000]     vmalloc : 0xde000000 - 0xff000000   ( 528 MB)
25[    0.000000]     lowmem  : 0xc0000000 - 0xdde00000   ( 478 MB)
26[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
27[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
28[    0.000000]       .text : 0xc0208000 - 0xc06dfe1c   (4960 kB)
29[    0.000000]       .init : 0xc06e0000 - 0xc070e000   ( 184 kB)
30[    0.000000]       .data : 0xc070e000 - 0xc0753e04   ( 280 kB)
31[    0.000000]        .bss : 0xc0753e04 - 0xc07b8b84   ( 404 kB)
32[    0.000000] Preemptible hierarchical RCU implementation.
33[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
34[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
35[    0.000000] NR_IRQS:16 nr_irqs:16 16
36[    0.000011] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns
37[    0.000025] Switching to timer-based delay loop, resolution 160ns
38[    0.000449] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
39[    0.000474] pid_max: default: 32768 minimum: 301
40[    0.000717] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
41[    0.000736] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
42[    0.001379] CPU: Testing write buffer coherency: ok
43[    0.001641] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
44[    0.002142] Setting up static identity map for 0x42213180 - 0x422131d8
45[    0.063444] CPU1: Booted secondary processor
46[    0.063563] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
47[    0.063678] Brought up 2 CPUs
48[    0.063705] SMP: Total of 2 processors activated (25.00 BogoMIPS).
49[    0.063716] CPU: All CPU(s) started in SVC mode.
50[    0.078371] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0
51[    0.078911] pinctrl core: initialized pinctrl subsystem
52[    0.090926] NET: Registered protocol family 16
53[    0.091227] DMA: preallocated 256 KiB pool for atomic coherent allocations
54[    0.113853] cpuidle: using governor ladder
55[    0.144867] cpuidle: using governor menu
56[    0.162539] ipq8064-pinctrl 800000.pinmux: Invalid config param 000a
57[    0.162561] ipq8064-pinctrl 800000.pinmux: pin_config_group_set op failed for group 1
58[    0.162577] ipq8064-pinctrl 800000.pinmux: Error applying setting, reverse things back
59[    0.162597] ipq8064-pinctrl 800000.pinmux: failed to select default state
60[    0.164729] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
61[    0.164794] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup
62[    0.164851] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup
63[    0.170684] qcom,rpm-clk 108000.rpm:mm-fabric-clk: failed to prepare 16
64[    0.170714] qcom,rpm-clk: probe of 108000.rpm:mm-fabric-clk failed with error -22
65[    0.170963] qcom,rpm-clk 108000.rpm:mmfpb-clk: failed to prepare 14
66[    0.170992] qcom,rpm-clk: probe of 108000.rpm:mmfpb-clk failed with error -22
67[    0.209865] pps_core: LinuxPPS API ver. 1 registered
68[    0.209880] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
69[    0.209922] PTP clock support registered
70[    0.211067] pcie_init: pcie_init: unable to create IPC log context for pcie0-short
71[    0.211081] pcie_init: pcie_init: unable to create IPC log context for pcie0-long
72[    0.211093] pcie_init: pcie_init: unable to create IPC log context for pcie1-short
73[    0.211104] pcie_init: pcie_init: unable to create IPC log context for pcie1-long
74[    0.211498] Switched to clocksource dg_timer
75[    0.212945] NET: Registered protocol family 2
76[    0.213634] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
77[    0.213673] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
78[    0.213727] TCP: Hash tables configured (established 4096 bind 4096)
79[    0.213773] TCP: reno registered
80[    0.213793] UDP hash table entries: 256 (order: 1, 8192 bytes)
81[    0.213813] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
82[    0.214072] NET: Registered protocol family 1
83[    0.214145] PCI: CLS 0 bytes, default 64
84[    0.215279] futex hash table entries: 512 (order: 3, 32768 bytes)
85[    0.215371] Crashlog allocated RAM at address 0x5fd00000
86[    0.216241] squashfs: version 3.0 (2006/03/15) Phillip Lougher
87[    0.216282] msgmni has been set to 935
88[    0.218576] io scheduler noop registered
89[    0.218599] io scheduler deadline registered (default)
90[    0.220085] 1b500000.pci supply vdda not found, using dummy regulator
91[    0.220171] 1b500000.pci supply vdda_phy not found, using dummy regulator
92[    0.220253] 1b500000.pci supply vdda_refclk not found, using dummy regulator
93[    0.256871] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
94[    0.256895] pci_bus 0000:00: root bus resource [io  0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff])
95[    0.256911] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
96[    0.256928] pci_bus 0000:00: root bus resource [bus 00-ff]
97[    0.256980] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
98[    0.257114] pci 0000:00:00.0: supports D1
99[    0.257128] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
100[    0.257444] PCI: bus0: Fast back to back transfers disabled
101[    0.257772] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
102[    0.257964] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
103[    0.258845] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
104[    0.259254] PCI: bus1: Fast back to back transfers disabled
105[    0.259275] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
106[    0.259430] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
107[    0.259453] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
108[    0.259558] pci 0000:00:00.0: PCI bridge to [bus 01]
109[    0.259578] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
110[    0.260030] aer 0000:00:00.0:pcie02: service driver aer loaded
111[    0.260385] 1b700000.pci supply vdda not found, using dummy regulator
112[    0.260467] 1b700000.pci supply vdda_phy not found, using dummy regulator
113[    0.260552] 1b700000.pci supply vdda_refclk not found, using dummy regulator
114[    0.296349] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
115[    0.296370] pci_bus 0001:00: root bus resource [io  0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff])
116[    0.296385] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
117[    0.296401] pci_bus 0001:00: root bus resource [bus 00-ff]
118[    0.296443] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
119[    0.296556] pci 0001:00:00.0: supports D1
120[    0.296570] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
121[    0.296879] PCI: bus0: Fast back to back transfers disabled
122[    0.297199] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
123[    0.297385] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
124[    0.298263] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
125[    0.298682] PCI: bus1: Fast back to back transfers disabled
126[    0.298701] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
127[    0.298918] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
128[    0.298940] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
129[    0.299040] pci 0001:00:00.0: PCI bridge to [bus 01]
130[    0.299060] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
131[    0.299448] aer 0001:00:00.0:pcie02: service driver aer loaded
132[    0.302083] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
133[    0.303143] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
134[    0.304052] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
135[    0.305086] msm_serial 16340000.serial: msm_serial: detected port #0
136[    0.305191] msm_serial 16340000.serial: uartclk = 1843200
137[    0.305247] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM
138[    0.305300] msm_serial: console setup on port #0
139[    1.009613] console [ttyMSM0] enabled
140[    1.014481] msm_serial: driver initialized
141[    1.021152] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
142[    1.021765] nand: Micron MT29F1G08ABBEAH4
143[    1.028180] nand: 128MiB, SLC, page size: 2048, OOB size: 64
144[    1.032171] Scanning device for bad blocks
145[    1.440230] random: nonblocking pool is initialized
146[    1.746576] 10 ofpart partitions found on MTD device qcom-nandc
147[    1.746603] Creating 10 MTD partitions on MTD deqcom-nandcnandc
148[    1.751300] 0x000000000000-0x000000c80000 : D deqcqcadatacnandc
149[    1.757449] 0x000000c80000-0x000001180000 : D deqcAPPSBLacnand
150[    1.762564] 0x000001180000-0x000001200000 : D deqcAPPSBLENVand
151[    1.767523] 0x000001200000-0x000001340000 : D deqcartot;ENV
152[    1.772527] 0x000001340000-0x000001480000 : D deqcartbakENV
153[    1.777340] 0x000001480000-0x000003280000 : D deqclinux;ENV
154[    1.782490] 0x0000016a0000-0x000003280000 : D deqcrootfsENV
155[    1.786997] mtd: partition 0x0000rootfs00 : D set to be root filesystem
156[    1.791404] 0x000003280000-0x000003480000 : D set nvram;root
157[    1.797920] 0x000004000000-0x000006000000 : D set ddwrt;root
158[    1.802636] 0x000007900000-0x000007f40000 : D set reservedot
159[    1.808086] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
160[    1.812704] m25p80 spi32766.0: found mr25h256, expected s25fl512s
161[    1.819015] m25p80 spi32766.0: mr25h256 (32 Kbytes)
162[    1.827201] IMQ: autocreate imq0  NS c074e0c0
163[    1.830305] IMQ: autocreate imq1  NS c074e0c0
164[    1.834374] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1)
165[    1.838623]  Hooking IMQ after NAT on PREROUTING.
166[    1.845467]  Hooking IMQ before NAT on POSTROUTING.
167[    1.850382] libphy: Fixed MDIO Bus: probed
168[    1.855193] libphy: GPIO Bitbanged MDIO: probed
169[    1.879223] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
170[    2.621063] tun: Universal TUN/TAP device driver, 1.6
171[    2.621088] tun: (C) 1999-2004 Max Krasnyansky
172[    2.627041] stmmac - user ID: 0x10, Synopsys ID: 0x37
173[    2.631163]  Ring mode enabled
174[    2.636390]  DMA HW capability register supported
175[    2.639236]  Enhanced/Alternate descriptors
176[    2.644010]  Enabled extended descriptors
177[    2.648004]  RX Checksum Offload Engine supported (type 2)
178[    2.652241]  TX Checksum insertion supported
179[    2.657550]  Wake-Up On Lan supported
180[    2.662125]  Enable RX Mitigation via HW Watchdog Timer
181[    2.666780] stmmac - user ID: 0x10, Synopsys ID: 0x37
182[    2.670573]  Ring mode enabled
183[    2.675870]  DMA HW capability register supported
184[    2.678732]  Enhanced/Alternate descriptors
185[    2.683506]  Enabled extended descriptors
186[    2.687498]  RX Checksum Offload Engine supported (type 2)
187[    2.691666]  TX Checksum insertion supported
188[    2.697131]  Wake-Up On Lan supported
189[    2.701532]  Enable RX Mitigation via HW Watchdog Timer
190[    2.705802] PPP generic driver version 2.4.2
191[    2.710210] PPP BSD Compression module registered
192[    2.714670] PPP Deflate Compression module registered
193[    2.719203] PPP MPPE Compression module registered
194[    2.724302] NET: Registered protocol family 24
195[    2.728944] PPTP driver version 0.8.5
196[    2.733533] i2c /dev entries driver
197[    2.742822] Speed bin: 0
198[    2.742843] PVS bin: 4
199[    2.744827] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral
200[    2.748723] L2 @ QSB rate. Forcing new rate.
201[    2.754456] L2 @ 387500 KHz
202[    2.758683] CPU0 @ 800000 KHz
203[    2.761080] CPU1 @ QSB rate. Forcing new rate.
204[    2.764354] CPU1 @ 384000 KHz
205[    2.768902] GACT probability NOT on
206[    2.771604] Mirror/redirect action on
207[    2.775008] Simple TC action Loaded
208[    2.779517] netem: version 1.3
209[    2.782131] u32 classifier
210[    2.785124]     Performance counters on
211[    2.787816]     input device check on
212[    2.791548]     Actions configured
213[    2.795494] Netfilter messages via NETLINK v0.30.
214[    2.798728] nf_conntrack version 0.5.0 (7486 buckets, 29944 max)
215[    2.803865] nf_conntrack_rtsp v0.7 loading
216[    2.810016] xt_time: kernel timezone is -0000
217[    2.813532] ip_set: protocol 6
218[    2.818137] gre: GRE over IPv4 demultiplexor driver
219[    2.821064] nf_nat_rtsp v0.7 loading
220[    2.825697] ip_tables: (C) 2000-2006 Netfilter Core Team
221[    2.829658] TCP: bic registered
222[    2.834798] TCP: cubic registered
223[    2.837567] TCP: westwood registered
224[    2.841039] TCP: highspeed registered
225[    2.844754] TCP: hybla registered
226[    2.848244] TCP: htcp registered
227[    2.851544] TCP: vegas registered
228[    2.854909] TCP: veno registered
229[    2.858053] TCP: scalable registered
230[    2.861350] TCP: lp registered
231[    2.864999] TCP: yeah registered
232[    2.867773] TCP: illinois registered
233[    2.871164] NET: Registered protocol family 17
234[    2.874876] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
235[    2.879020] Bridge firewalling registered
236[    2.891803] 8021q: 802.1Q VLAN Support v1.8
237[    2.895749] Registering SWP/SWPB emulation handler
238[    2.903871] trying to register driver generic_krait
239[    2.904502] Frequency table not initialized.
240[    2.909365] Frequency table not initialized.
241[    2.913920] Frequency table not initialized.
242[    2.918025] Frequency table not initialized.
243[    2.922377] Frequency table not initialized.
244[    2.928510] Frequency table not initialized.
245[    2.930837] Frequency table not initialized.
246[    2.935131] Frequency table not initialized.
247[    2.939290] Frequency table not initialized.
248[    2.943610] Frequency table not initialized.
249[    2.947810] driver generic_krait up and running
250[    2.952167] searching for nvram
251[    2.956313] nvram size = -1066983986
252[    2.979407] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
253[    2.986851] UBIFS error (pid 1): ubifs_mount: cannot open ce (rtubi0:rootfscated., error -19
254[    2.988470] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
255[    2.993577] Freeing unused kernel memory: 184K (c06e0000 - c070e000)
256[    5.077550] UBIFS error (pid 491): ubifs_mount: cannot open 070e00ubi0:rootfs_data error, error -19
257[    6.159177] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
258[    6.159201] Backport generated by backports.git backports-20160324-9-g0e38f5c
259[    6.601105] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
260[    6.601639] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
261[    6.743128] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
262[    6.743163] ath10k_pci 0000:01:00.0: Falling back to user helper
263[    7.046953] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
264[    7.046989] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
265[    7.058541] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.4-00068 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 fb5bee97
266[    7.066895] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0046,subsystem-vendor=168c,subsystem-device=cafe from ath10k/QCA9984/hw1.0/board-2.bin
267[    7.089013] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 d6a914a1
268[    7.981165] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
269[    8.052405] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
270[    8.423964] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
271[    8.490442] ath: EEPROM regdomain: 0x0
272[    8.490466] ath: EEPROM indicates default country code should be used
273[    8.490483] ath: doing EEPROM country->regdmn map search
274[    8.490508] ath: country maps to regdmn code: 0x3a
275[    8.490528] ath: Country alpha2 being used: US
276[    8.490545] ath: Regpair used: 0x3a
277[    8.505198] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
278[    8.505877] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
279[    8.633822] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
280[    8.633860] ath10k_pci 0001:01:00.0: Falling back to user helper
281[    8.644936] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
282[    8.649580] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
283[    8.662760] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.4-00068 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 fb5bee97
284[    8.667825] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0046,subsystem-vendor=168c,subsystem-device=cafe from ath10k/QCA9984/hw1.0/board-2.bin
285[    8.681159] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 d6a914a1
286[   10.031410] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
287[   10.096928] ath: EEPROM regdomain: 0x0
288[   10.096945] ath: EEPROM indicates default country code should be used
289[   10.096956] ath: doing EEPROM country->regdmn map search
290[   10.096972] ath: country maps to regdmn code: 0x3a
291[   10.096984] ath: Country alpha2 being used: US
292[   10.096995] ath: Regpair used: 0x3a
293[   12.196182] device br0 entered promiscuous mode
294[   12.446953] device eth0 entered promiscuous mode
295[   12.447048] br0: port 1(eth0) entered forwarding state
296[   12.450667] br0: port 1(eth0) entered forwarding state
297[   12.696199] device eth1 entered promiscuous mode
298[   12.696258] br0: port 2(eth1) entered forwarding state
299[   12.699890] br0: port 2(eth1) entered forwarding state
300[   12.712143] device br0 left promiscuous mode
301[   12.714965] device br0 entered promiscuous mode
302[   12.729579] device br0 left promiscuous mode
303[   12.842085] br0: port 1(eth0) entered disabled state
304[   12.842295] br0: port 2(eth1) entered disabled state
305[   14.431949] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
306[   14.432057] br0: port 1(eth0) entered forwarding state
307[   14.439840] br0: port 1(eth0) entered forwarding state
308[   14.682999] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
309[   14.683084] br0: port 2(eth1) entered forwarding state
310[   14.690881] br0: port 2(eth1) entered forwarding state
311[   16.432403] br0: port 1(eth0) entered forwarding state
312[   16.682131] br0: port 2(eth1) entered forwarding state
313[   18.789395] device ath0.1 entered promiscuous mode
314[   19.233895] old slottime_reg 9 and timeout_reg 100A3240
315[   19.233916] set coverageclass 4 with slot 9
316[   19.237915] new slottime_reg 15 and timeout_reg 100A2525 sifs 10 sifs_pipeline 924
317[   24.236807] ath10k_pci 0000:01:00.0: failed to synchronize setup for vdev 0 restart 0: -110
318[   24.236876] ath10k_pci 0000:01:00.0: failed to start vdev 0 addr b2:7f:b9:4a:44:be on freq 5220: -110
319[   24.281973] device ath0.1 left promiscuous mode
320[   24.282010] br0: port 3(ath0.1) entered disabled state
321[   24.322591] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1
322[   26.897656] old slottime_reg 9 and timeout_reg 100A3240
323[   26.897677] set coverageclass 4 with slot 9
324[   26.901676] new slottime_reg 15 and timeout_reg 100A2525 sifs 10 sifs_pipeline 924
325[   27.657715] device ath1 entered promiscuous mode
326[   28.036600] old slottime_reg 14 and timeout_reg 100A3240
327[   28.036632] set coverageclass 4 with slot 20
328[   28.040979] new slottime_reg 20 and timeout_reg 100A2A2A sifs A sifs_pipeline 5A0
329[   30.221966] br0: port 3(ath1) entered forwarding state
330[   30.222042] br0: port 3(ath1) entered forwarding state
331[   31.206590] old slottime_reg 9 and timeout_reg 100A2A2A
332[   31.206618] set coverageclass 4 with slot 9
333[   31.210641] new slottime_reg 15 and timeout_reg 100A1F1F sifs A sifs_pipeline 5A0
334[   32.225676] br0: port 3(ath1) entered forwarding state
335[   35.485583] old slottime_reg 9 and timeout_reg 100A1F1F
336[   35.485628] set coverageclass 4 with slot 9
337[   35.489631] new slottime_reg 15 and timeout_reg 100A1F1F sifs A sifs_pipeline 5A0