Changeset 11343


Ignore:
Timestamp:
01/09/09 01:14:16 (4 years ago)
Author:
BrainSlayer
Message:

update the whole tree. introduces wg302v1 support

Location:
src/linux/xscale/linux-2.6.23
Files:
6 added
15 edited

Legend:

Unmodified
Added
Removed

  • src/linux/xscale/linux-2.6.23/.config

    r9987 r11343  
    22# Automatically generated make config: don't edit 
    33# Linux kernel version: 2.6.23.17 
    4 # Fri Jul 25 23:09:39 2008 
     4# Fri Jan  9 00:13:02 2009 
    55# 
    66CONFIG_ARM=y 
    … …  
    145145# 
    146146# CONFIG_MACH_NSLU2 is not set 
    147 CONFIG_MACH_AVILA=y 
     147# CONFIG_MACH_AVILA is not set 
    148148# CONFIG_MACH_CAMBRIA is not set 
    149 CONFIG_MACH_LOFT=y 
    150149# CONFIG_ARCH_ADI_COYOTE is not set 
    151150# CONFIG_MACH_GATEWAY7001 is not set 
    152 CONFIG_MACH_WG302V2=y 
    153 CONFIG_MACH_WRT300NV2=y 
    154 CONFIG_MACH_COMPEX=y 
    155 CONFIG_MACH_PRONGHORNMETRO=y 
     151CONFIG_MACH_WG302V1=y 
     152# CONFIG_MACH_WG302V2 is not set 
     153# CONFIG_MACH_WRT300NV2 is not set 
     154# CONFIG_MACH_COMPEX is not set 
     155# CONFIG_MACH_PRONGHORNMETRO is not set 
    156156CONFIG_ARCH_IXDP425=y 
    157 CONFIG_TONZE=y 
     157# CONFIG_TONZE is not set 
    158158# CONFIG_NOP8670 is not set 
    159159# CONFIG_MACH_IXDPG425 is not set 
    … …  
    166166CONFIG_ARCH_IXDP4XX=y 
    167167# CONFIG_MACH_GTWX5715 is not set 
     168# CONFIG_MACH_MI424WR is not set 
    168169 
    169170# 
    … …  
    171172# 
    172173CONFIG_DMABOUNCE=y 
    173 # CONFIG_DMABOUNCE_DEBUG is not set 
     174CONFIG_DMABOUNCE_DEBUG=y 
    174175# CONFIG_IXP4XX_INDIRECT_PCI is not set 
    175176CONFIG_IXP400_LIB=m 
    … …  
    246247CONFIG_ZBOOT_ROM_TEXT=0x0 
    247248CONFIG_ZBOOT_ROM_BSS=0x0 
    248 CONFIG_CMDLINE="console=ttyS0,115200 panic=10 root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd" 
     249CONFIG_CMDLINE="console=ttyS0,115200 panic=10 root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd mem=32M" 
    249250# CONFIG_XIP_KERNEL is not set 
    250251# CONFIG_KEXEC is not set 
    … …  
    300301CONFIG_NET_IPGRE=m 
    301302CONFIG_NET_IPGRE_BROADCAST=y 
     303CONFIG_NET_ETHERIP=m 
    302304CONFIG_IP_MROUTE=y 
    303305CONFIG_IP_PIMSM_V1=y 
    … …  
    691693CONFIG_BLK_DEV_NBD=y 
    692694# CONFIG_BLK_DEV_SX8 is not set 
     695# CONFIG_BLK_DEV_UB is not set 
    693696# CONFIG_BLK_DEV_RAM is not set 
    694697# CONFIG_CDROM_PKTCDVD is not set 
    … …  
    801804# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    802805# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    803 CONFIG_IXP400_NAPI=y 
     806# CONFIG_IXP400_NAPI is not set 
    804807# CONFIG_IXP4XX_QMGR is not set 
    805808# CONFIG_IXP4XX_NPE is not set 
    … …  
    841844# CONFIG_STRIP is not set 
    842845# CONFIG_WLAN_80211 is not set 
     846 
     847# 
     848# USB Network Adapters 
     849# 
     850# CONFIG_USB_CATC is not set 
     851# CONFIG_USB_KAWETH is not set 
     852# CONFIG_USB_PEGASUS is not set 
     853# CONFIG_USB_RTL8150 is not set 
     854# CONFIG_USB_USBNET_MII is not set 
     855# CONFIG_USB_USBNET is not set 
    843856# CONFIG_WAN is not set 
    844857# CONFIG_FDDI is not set 
    … …  
    926939CONFIG_SERIAL_8250=y 
    927940CONFIG_SERIAL_8250_CONSOLE=y 
    928 # CONFIG_SERIAL_8250_PCI is not set 
    929 CONFIG_SERIAL_8250_NR_UARTS=2 
    930 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 
    931 # CONFIG_SERIAL_8250_EXTENDED is not set 
     941CONFIG_SERIAL_8250_PCI=y 
     942CONFIG_SERIAL_8250_NR_UARTS=10 
     943CONFIG_SERIAL_8250_RUNTIME_UARTS=10 
     944CONFIG_SERIAL_8250_EXTENDED=y 
     945# CONFIG_SERIAL_8250_MANY_PORTS is not set 
     946# CONFIG_SERIAL_8250_SHARE_IRQ is not set 
     947# CONFIG_SERIAL_8250_DETECT_IRQ is not set 
     948# CONFIG_SERIAL_8250_RSA is not set 
    932949 
    933950# 
    … …  
    955972# CONFIG_PCIPCWATCHDOG is not set 
    956973# CONFIG_WDTPCI is not set 
     974 
     975# 
     976# USB-based Watchdog Cards 
     977# 
     978# CONFIG_USBPCWATCHDOG is not set 
    957979CONFIG_IXP425_GPIO=y 
    958980# CONFIG_HW_RANDOM is not set 
    … …  
    10001022# CONFIG_I2C_TAOS_EVM is not set 
    10011023# CONFIG_I2C_STUB is not set 
     1024# CONFIG_I2C_TINY_USB is not set 
    10021025# CONFIG_I2C_VIA is not set 
    10031026# CONFIG_I2C_VIAPRO is not set 
    … …  
    11381161# CONFIG_SOUND is not set 
    11391162# CONFIG_HID_SUPPORT is not set 
    1140 # CONFIG_USB_SUPPORT is not set 
     1163CONFIG_USB_SUPPORT=y 
     1164CONFIG_USB_ARCH_HAS_HCD=y 
     1165CONFIG_USB_ARCH_HAS_OHCI=y 
     1166CONFIG_USB_ARCH_HAS_EHCI=y 
     1167CONFIG_USB=m 
     1168# CONFIG_USB_DEBUG is not set 
     1169 
     1170# 
     1171# Miscellaneous USB options 
     1172# 
     1173# CONFIG_USB_DEVICEFS is not set 
     1174CONFIG_USB_DEVICE_CLASS=y 
     1175# CONFIG_USB_DYNAMIC_MINORS is not set 
     1176# CONFIG_USB_OTG is not set 
     1177 
     1178# 
     1179# USB Host Controller Drivers 
     1180# 
     1181# CONFIG_USB_EHCI_HCD is not set 
     1182# CONFIG_USB_ISP116X_HCD is not set 
     1183# CONFIG_USB_OHCI_HCD is not set 
     1184CONFIG_USB_UHCI_HCD=m 
     1185# CONFIG_USB_SL811_HCD is not set 
     1186# CONFIG_USB_R8A66597_HCD is not set 
     1187 
     1188# 
     1189# USB Device Class drivers 
     1190# 
     1191# CONFIG_USB_ACM is not set 
     1192# CONFIG_USB_PRINTER is not set 
     1193 
     1194# 
     1195# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' 
     1196# 
     1197 
     1198# 
     1199# may also be needed; see USB_STORAGE Help for more information 
     1200# 
     1201# CONFIG_USB_STORAGE is not set 
     1202# CONFIG_USB_LIBUSUAL is not set 
     1203 
     1204# 
     1205# USB Imaging devices 
     1206# 
     1207# CONFIG_USB_MDC800 is not set 
     1208# CONFIG_USB_MICROTEK is not set 
     1209CONFIG_USB_MON=y 
     1210 
     1211# 
     1212# USB port drivers 
     1213# 
     1214 
     1215# 
     1216# USB Serial Converter support 
     1217# 
     1218# CONFIG_USB_SERIAL is not set 
     1219 
     1220# 
     1221# USB Miscellaneous drivers 
     1222# 
     1223# CONFIG_USB_EMI62 is not set 
     1224# CONFIG_USB_EMI26 is not set 
     1225# CONFIG_USB_ADUTUX is not set 
     1226# CONFIG_USB_AUERSWALD is not set 
     1227# CONFIG_USB_RIO500 is not set 
     1228# CONFIG_USB_LEGOTOWER is not set 
     1229# CONFIG_USB_LCD is not set 
     1230# CONFIG_USB_BERRY_CHARGE is not set 
     1231# CONFIG_USB_LED is not set 
     1232# CONFIG_USB_CYPRESS_CY7C63 is not set 
     1233# CONFIG_USB_CYTHERM is not set 
     1234# CONFIG_USB_PHIDGET is not set 
     1235# CONFIG_USB_IDMOUSE is not set 
     1236# CONFIG_USB_FTDI_ELAN is not set 
     1237# CONFIG_USB_APPLEDISPLAY is not set 
     1238# CONFIG_USB_LD is not set 
     1239# CONFIG_USB_TRANCEVIBRATOR is not set 
     1240# CONFIG_USB_IOWARRIOR is not set 
     1241 
     1242# 
     1243# USB DSL modem support 
     1244# 
     1245 
     1246# 
     1247# USB Gadget Support 
     1248# 
     1249# CONFIG_USB_GADGET is not set 
    11411250# CONFIG_MMC is not set 
    11421251CONFIG_RTC_LIB=y 
    … …  
    12741383# CONFIG_BFS_FS is not set 
    12751384# CONFIG_EFS_FS is not set 
    1276 CONFIG_JFFS2_FS=y 
     1385CONFIG_JFFS2_FS=m 
    12771386CONFIG_JFFS2_FS_DEBUG=0 
    12781387CONFIG_JFFS2_FS_WRITEBUFFER=y 

  • src/linux/xscale/linux-2.6.23/.config_cambria

    r11050 r11343  
    22# Automatically generated make config: don't edit 
    33# Linux kernel version: 2.6.23.17 
    4 # Wed Dec  3 17:58:49 2008 
     4# Wed Dec 31 15:42:58 2008 
    55# 
    66CONFIG_ARM=y 
    … …  
    149149# CONFIG_ARCH_ADI_COYOTE is not set 
    150150# CONFIG_MACH_GATEWAY7001 is not set 
     151# CONFIG_MACH_WG302V1 is not set 
    151152# CONFIG_MACH_WG302V2 is not set 
    152153# CONFIG_MACH_WRT300NV2 is not set 
    … …  
    162163CONFIG_CPU_IXP43X=y 
    163164# CONFIG_MACH_GTWX5715 is not set 
     165# CONFIG_MACH_MI424WR is not set 
    164166 
    165167# 
    … …  
    854856# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    855857# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    856 CONFIG_IXP400_NAPI=y 
     858# CONFIG_IXP400_NAPI is not set 
    857859# CONFIG_IXP4XX_QMGR is not set 
    858860# CONFIG_IXP4XX_NPE is not set 
    … …  
    14391441# CONFIG_JFS_FS is not set 
    14401442CONFIG_FS_POSIX_ACL=y 
    1441 # CONFIG_XFS_FS is not set 
     1443CONFIG_XFS_FS=m 
     1444# CONFIG_XFS_QUOTA is not set 
     1445# CONFIG_XFS_SECURITY is not set 
     1446# CONFIG_XFS_POSIX_ACL is not set 
     1447# CONFIG_XFS_RT is not set 
    14421448# CONFIG_GFS2_FS is not set 
    14431449# CONFIG_OCFS2_FS is not set 
    … …  
    14641470# DOS/FAT/NT Filesystems 
    14651471# 
    1466 # CONFIG_MSDOS_FS is not set 
    1467 # CONFIG_VFAT_FS is not set 
     1472CONFIG_FAT_FS=m 
     1473CONFIG_MSDOS_FS=m 
     1474CONFIG_VFAT_FS=m 
     1475CONFIG_FAT_DEFAULT_CODEPAGE=437 
     1476CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" 
    14681477# CONFIG_NTFS_FS is not set 
    14691478 

  • src/linux/xscale/linux-2.6.23/.config_compex

    r11054 r11343  
    150150# CONFIG_ARCH_ADI_COYOTE is not set 
    151151# CONFIG_MACH_GATEWAY7001 is not set 
     152# CONFIG_MACH_WG302V1 is not set 
    152153# CONFIG_MACH_WG302V2 is not set 
    153154# CONFIG_MACH_WRT300NV2 is not set 
    … …  
    166167CONFIG_ARCH_IXDP4XX=y 
    167168# CONFIG_MACH_GTWX5715 is not set 
     169# CONFIG_MACH_MI424WR is not set 
    168170 
    169171# 
    … …  
    802804# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    803805# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    804 CONFIG_IXP400_NAPI=y 
     806# CONFIG_IXP400_NAPI is not set 
    805807# CONFIG_IXP4XX_QMGR is not set 
    806808# CONFIG_IXP4XX_NPE is not set 

  • src/linux/xscale/linux-2.6.23/.config_pronghorn

    r11057 r11343  
    150150# CONFIG_ARCH_ADI_COYOTE is not set 
    151151# CONFIG_MACH_GATEWAY7001 is not set 
     152# CONFIG_MACH_WG302V1 is not set 
    152153# CONFIG_MACH_WG302V2 is not set 
    153154# CONFIG_MACH_WRT300NV2 is not set 
    … …  
    162163# CONFIG_MACH_DSMG600 is not set 
    163164# CONFIG_MACH_GTWX5715 is not set 
     165# CONFIG_MACH_MI424WR is not set 
    164166 
    165167# 
    … …  
    797799# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    798800# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    799 CONFIG_IXP400_NAPI=y 
     801# CONFIG_IXP400_NAPI is not set 
    800802# CONFIG_IXP4XX_QMGR is not set 
    801803# CONFIG_IXP4XX_NPE is not set 

  • src/linux/xscale/linux-2.6.23/.config_senao

    r11054 r11343  
    151151# CONFIG_ARCH_ADI_COYOTE is not set 
    152152# CONFIG_MACH_GATEWAY7001 is not set 
    153 CONFIG_MACH_WG302V2=y 
     153# CONFIG_MACH_WG302V1 is not set 
     154# CONFIG_MACH_WG302V2 is not set 
    154155CONFIG_MACH_WRT300NV2=y 
    155156CONFIG_MACH_COMPEX=y 
    156157CONFIG_MACH_PRONGHORNMETRO=y 
     158CONFIG_MACH_MI424WR=y 
    157159CONFIG_ARCH_IXDP425=y 
    158160CONFIG_TONZE=y 
    … …  
    802804# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    803805# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    804 CONFIG_IXP400_NAPI=y 
     806# CONFIG_IXP400_NAPI is not set 
    805807# CONFIG_IXP4XX_QMGR is not set 
    806808# CONFIG_IXP4XX_NPE is not set 

  • src/linux/xscale/linux-2.6.23/.config_tonze

    r11054 r11343  
    151151# CONFIG_ARCH_ADI_COYOTE is not set 
    152152# CONFIG_MACH_GATEWAY7001 is not set 
    153 CONFIG_MACH_WG302V2=y 
     153# CONFIG_MACH_WG302V1 is not set 
     154# CONFIG_MACH_WG302V2 is not set 
    154155CONFIG_MACH_WRT300NV2=y 
    155156CONFIG_MACH_COMPEX=y 
    156157CONFIG_MACH_PRONGHORNMETRO=y 
    157158CONFIG_ARCH_IXDP425=y 
     159CONFIG_MACH_MI424WR=y 
    158160CONFIG_TONZE=y 
    159161# CONFIG_NOP8670 is not set 
    … …  
    802804# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    803805# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    804 CONFIG_IXP400_NAPI=y 
     806# CONFIG_IXP400_NAPI is not set 
    805807# CONFIG_IXP4XX_QMGR is not set 
    806808# CONFIG_IXP4XX_NPE is not set 

  • src/linux/xscale/linux-2.6.23/.config_wg302v2

    r11248 r11343  
    153153# CONFIG_ARCH_ADI_COYOTE_WRT300N is not set 
    154154# CONFIG_MACH_GATEWAY7001 is not set 
     155# CONFIG_MACH_WG302V1 is not set 
    155156CONFIG_MACH_WG302V2=y 
    156157# CONFIG_MACH_WRT300NV2 is not set 
    … …  
    805806# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    806807# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    807 CONFIG_IXP400_NAPI=y 
     808# CONFIG_IXP400_NAPI is not set 
    808809# CONFIG_IXP4XX_QMGR is not set 
    809810# CONFIG_IXP4XX_NPE is not set 

  • src/linux/xscale/linux-2.6.23/.config_xscale

    r11056 r11343  
    149149# CONFIG_MACH_CAMBRIA is not set 
    150150CONFIG_MACH_LOFT=y 
     151CONFIG_MACH_MI424WR=y 
    151152CONFIG_ARCH_ADI_COYOTE=y 
    152153# CONFIG_ARCH_ADI_COYOTE_WRT300N is not set 
    153154# CONFIG_MACH_GATEWAY7001 is not set 
    154 CONFIG_MACH_WG302V2=y 
     155# CONFIG_MACH_WG302V1 is not set 
     156# CONFIG_MACH_WG302V2 is not set 
    155157# CONFIG_MACH_WRT300NV2 is not set 
    156158CONFIG_MACH_COMPEX=y 
    … …  
    804806# CONFIG_IXP400_ETH_SKB_RECYCLE is not set 
    805807# CONFIG_IXP400_ETH_QDISC_ENABLED is not set 
    806 CONFIG_IXP400_NAPI=y 
     808# CONFIG_IXP400_NAPI is not set 
    807809# CONFIG_IXP4XX_QMGR is not set 
    808810# CONFIG_IXP4XX_NPE is not set 

  • src/linux/xscale/linux-2.6.23/Documentation/networking/bonding.txt

    r8329 r11343  
    464464                chosen. 
    465465 
     466        weighted-rr or 7 
     467 
     468                Weighted round-robin bonding. In this mode bonding 
     469                interface will use weights assigned to it's slaves. 
     470 
     471                Each slave can have weight assigned via ioctl (ifenslave). 
     472                These values will be used at the start of each "cycle". 
     473                Each slave will have token counter restored to it's weight. 
     474                Then using round-robin mechanism those tokens are "used" 
     475                to pay for emitted frames. When all token counters are 
     476                zeroed - new "cycle" begins. 
     477                 
     478 
    466479primary 
    467480 

  • src/linux/xscale/linux-2.6.23/arch/arm/boot/compressed/head-xscale.S

    r11248 r11343  
    4141               orr     r7, r7, #(MACH_TYPE_WG302V2 & 0xff00) 
    4242#endif 
     43#ifdef CONFIG_MACH_WG302V1 
     44               mov     r7, #(MACH_TYPE_WG302V1 & 0xff) 
     45               orr     r7, r7, #(MACH_TYPE_WG302V1 & 0xff00) 
     46#endif 
    4347#ifdef CONFIG_ARCH_LUBBOCK 
    4448                mov     r7, #MACH_TYPE_LUBBOCK 

  • src/linux/xscale/linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig

    r11248 r11343  
    7676          7001 Access Point. For more information on this platform, 
    7777          see http://openwrt.org 
     78 
     79config MACH_WG302V1 
     80        bool "Netgear WG302 v1 / WAG302 v1" 
     81        select PCI 
     82        help 
     83          Say 'Y' here if you want your kernel to support Netgear's 
     84          WG302 v1 or WAG302 v1 Access Points. For more information 
     85          on this platform, see http://openwrt.org 
     86 
    7887 
    7988config MACH_WG302V2 

  • src/linux/xscale/linux-2.6.23/arch/arm/mach-ixp4xx/Makefile

    r11248 r11343  
    1616obj-pci-$(CONFIG_MACH_COMPEX)           += ixdp425-pci.o 
    1717obj-pci-$(CONFIG_MACH_WRT300NV2)        += wrt300nv2-pci.o 
     18obj-pci-$(CONFIG_MACH_WG302V1)          += wg302v1-pci.o 
    1819obj-pci-$(CONFIG_MACH_WG302V2)          += wg302v2-pci.o 
    1920obj-pci-$(CONFIG_MACH_GATEWAY7001)      += gateway7001-pci.o 
    … …  
    4041obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o 
    4142obj-$(CONFIG_MACH_GATEWAY7001)  += gateway7001-setup.o 
     43obj-$(CONFIG_MACH_WG302V1)      += wg302v1-setup.o 
    4244obj-$(CONFIG_MACH_WG302V2)      += wg302v2-setup.o 
    4345 

  • src/linux/xscale/linux-2.6.23/drivers/net/ixp400_eth.c

    r11249 r11343  
    31553155 
    31563156    /* Module parameter */ 
    3157     if (no_phy_scan || machine_is_compex())  
     3157    if (no_phy_scan || machine_is_compex() || machine_is_wg302v1())  
    31583158    {  
    31593159        /* Use hardcoded phy addresses */ 
    … …  
    44304430        default_phy_cfg[1].linkMonitor=TRUE; 
    44314431        } 
     4432    if (machine_is_wg302v1()) 
     4433        { 
     4434        phyAddresses[0]=0x30; 
     4435        phyAddresses[1]=0x1; 
     4436        default_phy_cfg[0].linkMonitor=FALSE; 
     4437        default_phy_cfg[1].linkMonitor=TRUE; 
     4438        } 
    44324439    P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n"); 
    44334440 

  • src/linux/xscale/linux-2.6.23/kernel/softirq.c

    r8934 r11343  
    137137        WARN_ON_ONCE(in_irq()); 
    138138#endif 
    139         WARN_ON_ONCE(irqs_disabled()); 
     139//      WARN_ON_ONCE(irqs_disabled()); 
    140140 
    141141#ifdef CONFIG_TRACE_IRQFLAGS 

  • src/linux/xscale/linux-2.6.23/lib/kobject_uevent.c

    r8329 r11343  
    7272        int j; 
    7373 
    74         pr_debug("%s\n", __FUNCTION__); 
     74//      printk(KERN_EMERG "%s\n", __FUNCTION__); 
    7575 
    7676        action_string = kobject_actions[action]; 
    7777        if (!action_string) { 
    78                 pr_debug("kobject attempted to send uevent without action_string!\n"); 
     78//              printk(KERN_EMERG "kobject attempted to send uevent without action_string!\n"); 
    7979                return -EINVAL; 
    8080        } 
    … …  
    8686        } 
    8787        if (!top_kobj->kset) { 
    88                 pr_debug("kobject attempted to send uevent without kset!\n"); 
     88//              printk(KERN_EMERG "kobject attempted to send uevent without kset!\n"); 
    8989                return -EINVAL; 
    9090        } 
    … …  
    9696        if (uevent_ops && uevent_ops->filter) 
    9797                if (!uevent_ops->filter(kset, kobj)) { 
    98                         pr_debug("kobject filter function caused the event to drop!\n"); 
     98//                      printk(KERN_EMERG "kobject filter function caused the event to drop!\n"); 
    9999                        return 0; 
    100100                } 
    … …  
    106106                subsystem = kobject_name(&kset->kobj); 
    107107        if (!subsystem) { 
    108                 pr_debug("unset subsytem caused the event to drop!\n"); 
     108//              printk(KERN_EMERG "unset subsytem caused the event to drop!\n"); 
    109109                return 0; 
    110110        } 
    … …  
    153153                                  BUFFER_SIZE - (scratch - buffer)); 
    154154                if (retval) { 
    155                         pr_debug ("%s - uevent() returned %d\n", 
    156                                   __FUNCTION__, retval); 
     155//                      printk(KERN_EMERG "%s - uevent() returned %d\n", 
     156//                                __FUNCTION__, retval); 
    157157                        goto exit; 
    158158                } 
    … …  
    199199                argv [1] = (char *)subsystem; 
    200200                argv [2] = NULL; 
     201//              printk(KERN_EMERG "call %s %s\n",argv[0],argv[1]); 
    201202                call_usermodehelper (argv[0], argv, envp, UMH_WAIT_EXEC); 
    202203        } 
Note: See TracChangeset for help on using the changeset viewer.