Changeset 18138

Timestamp:

01/10/12 16:57:31 (17 months ago)

Author:

BrainSlayer

Message:

add support for dir825, wndr3700 and so on

File:

• src/linux/pb42/linux-3.2/drivers/net/ethernet/ag71xx/ag71xx_dev.c (modified) (3 diffs)

src/linux/pb42/linux-3.2/drivers/net/ethernet/ag71xx/ag71xx_dev.c

@@ -980 +980 @@
 #if defined(CONFIG_RTL8366_SMI) || defined(CONFIG_RTL8366_SMI_MODULE)
 
-#ifdef CONFIG_BUFFALO
+#ifdef CONFIG_TPLINK
+
+/* TL-WR1043ND */
+
+#define GPIO_RTL8366_SDA 18//gpio 19
+#define GPIO_RTL8366_SCK 19//gpio 20
+#elif CONFIG_BUFFALO
 /* WZR-HP-G300NH */
-#define GPIO_RTL8366_SDA    19
-#define GPIO_RTL8366_SCK    20
+
+#define GPIO_RTL8366_SDA 19//gpio 19
+#define GPIO_RTL8366_SCK 20//gpio 20
 #else
-/* TL-WR1043ND */
-#define GPIO_RTL8366_SDA    18
-#define GPIO_RTL8366_SCK    19
+/* DLINK-DIR825 or WNDR3700*/
+#define GPIO_RTL8366_SDA 5//gpio 19
+#define GPIO_RTL8366_SCK 7//gpio 20
+#endif
+
+#ifdef CONFIG_DIR825
+static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
+        { .reg = 0x06, .val = 0x0108 },
+};
 #endif
 
@@ -993 +1006 @@
         .gpio_sda        = GPIO_RTL8366_SDA,
         .gpio_sck        = GPIO_RTL8366_SCK,
+#ifdef CONFIG_DIR825
+        .num_initvals   = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
+        .initvals       = dir825b1_rtl8366s_initvals,
+#endif
 };
 
@@ -1015 +1032 @@
                 ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
         }
+#endif
+#if defined(CONFIG_DIR825) || defined(CONFIG_WNDR3700)
+        ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+        ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
 #endif