Index: /src/router/kromo/dd-wrt/lang_pack/polish.js
===================================================================
--- /src/router/kromo/dd-wrt/lang_pack/polish.js	(revision 18988)
+++ /src/router/kromo/dd-wrt/lang_pack/polish.js	(revision 18989)
@@ -4,8 +4,8 @@
 
 // ** COMMON SHARE LABEL **//
-var lang_charset = new Object();
+
 lang_charset.set="utf-8";
 
-var share = new Object();
+
 share.apn="APN";
 share.pin="PIN";
@@ -212,5 +212,5 @@
 share.change="Zmiana hasła użytkownika";
 
-var sbutton = new Object();
+
 sbutton.save="Zapisz";
 sbutton.savetitle="Zapisuje ustawienia bez ich zastosowania";
@@ -270,5 +270,5 @@
 
 // ** COMMON ERROR MESSAGES  **//
-var errmsg = new Object();
+
 errmsg.err0="Musisz wprowadzić użytkownika.";
 errmsg.err1="Musisz wprowadzić Nazwę Routera.";
@@ -380,5 +380,5 @@
 
 // **  COMMON MENU ENTRIES  **//
-var bmenu= new Object();
+
 bmenu.setup="Setup";
 bmenu.setupbasic="Basic Setup";
@@ -468,5 +468,5 @@
 
 // ** Alive.asp **//
-var alive = new Object();
+
 alive.titl="Keep Alive";
 alive.h2="Keep Alive";
@@ -483,5 +483,5 @@
 
 //help container
-var halive = new Object();
+
 halive.right2="Choose when reboot the router. Cron must be enabled in the management tab.";
 halive.right4="A maximum of three IPs separated by a <em>SPACE</em> is allowed.<br/>IP Format is xxx.xxx.xxx.xxx .";
@@ -489,5 +489,5 @@
 
 // ** config.asp **//
-var config = new Object();
+
 config.titl="Backup & Restore";
 config.h2="Backup Configuration";
@@ -501,5 +501,5 @@
 
 //help container
-var hconfig = new Object();
+
 hconfig.right2="You may backup your current configuration in case you need to reset the router back to its factory default settings.<br /><br />Click the <em>Backup</em> button to backup your current configuration.";
 hconfig.right4="Click the <em>Browse...</em> button to browse for a configuration file that is currently saved on your PC.<br /><br />Click the <em>" + sbutton.restore + "</em> button to overwrite all current configurations with the ones in the configuration file.";
@@ -507,5 +507,5 @@
 
 // ** DDNS.asp **//
-var ddns = new Object();
+
 ddns.titl="Dynamic DNS";
 ddns.h2="Dynamic Domain Name System (DDNS)";
@@ -523,5 +523,5 @@
 ddns.wanip="Do not use external ip check";
 
-var ddnsm = new Object();
+
 ddnsm.all_closed="DDNS server is currently closed";
 ddnsm.all_resolving="Resolving domain name";
@@ -533,5 +533,5 @@
 
 //help container
-var hddns = new Object();
+
 hddns.right2="DDNS allows you to access your network using domain names instead of IP addresses. The service manages changing IP addresses and updates your domain information dynamically. You must sign up for service through DynDNS.org, freedns.afraid.org, ZoneEdit.com, No-IP.com or Custom.";
 hddns.right4="Type an integer number in the box to set the force update interval (in days). Updates should only be performed automatically when your IP address has changed. Beware of your DDNS provider update abuse policy to avoid your hostname or domain to be blocked.";
@@ -539,5 +539,5 @@
 
 // ** Diagnostics.asp **//
-var diag = new Object();
+
 diag.titl="Diagnostics";
 diag.h2="Diagnostics";
@@ -550,10 +550,10 @@
 
 //help container
-var hdiag = new Object();
+
 hdiag.right2="You can run command lines via the web interface. Fill the text area with your command and click <em>" + sbutton.runcmd + "</em> to submit.";
 
 
 // ** DMZ.asp **//
-var dmz = new Object();
+
 dmz.titl="DMZ";
 dmz.h2="Demilitarized Zone (DMZ)";
@@ -563,10 +563,10 @@
 
 //help container
-var hdmz = new Object();
+
 hdmz.right2="Enabling this option will expose the specified host to the Internet. All ports will be accessible from the Internet.";
 
 
 // ** Factory_Defaults.asp **//
-var factdef = new Object();
+
 factdef.titl="Factory Defaults";
 factdef.h2="Factory Defaults";
@@ -576,10 +576,10 @@
 
 //help container
-var hfactdef = new Object();
+
 hfactdef.right1="This will reset all settings back to factory defaults. All of your settings will be erased.";
 
 
 // ** FilterIPMAC.asp **//
-var filterIP = new Object();
+
 filterIP.titl="List of clients";
 filterIP.h2="List of clients";
@@ -591,5 +591,5 @@
 
 // ** Filter.asp **//
-var filter = new Object();
+
 filter.titl="Access Restrictions";
 filter.h2="WAN Access";
@@ -611,5 +611,5 @@
 
 //help container
-var hfilter = new Object();
+
 hfilter.right2="You may define up to 10 access policies. Click <em>" + sbutton.del + "</em> to delete a policy or <em>" + sbutton.summary + "</em> to see a summary of the policy.";
 hfilter.right4="Enable or disable a policy.";
@@ -623,5 +623,5 @@
 
 // ** FilterSummary.asp **//
-var filterSum = new Object();
+
 filterSum.titl="Access Restrictions Summary";
 filterSum.h2="Internet Policy Summary";
@@ -631,5 +631,5 @@
 
 // ** Firewall.asp **//
-var firewall = new Object();
+
 firewall.titl="Firewall";
 firewall.h2="Security";
@@ -654,10 +654,10 @@
 
 //help container
-var hfirewall = new Object();
+
 hfirewall.right2="Enable or disable the SPI firewall.";
 
 
 // ** Forward.asp **//
-var prforward = new Object();
+
 prforward.titl="Port Range Forwarding";
 prforward.h2="Port Range Forward";
@@ -666,10 +666,10 @@
 
 //help container
-var hprforward = new Object();
+
 hprforward.right2="Certain applications may require to open specific ports in order for it to function correctly. Examples of these applications include servers and certain online games. When a request for a certain port comes in from the Internet, the router will route the data to the computer you specify. Due to security concerns, you may want to limit port forwarding to only those ports you are using, and uncheck the <em>" + share.enable +"</em> checkbox after you are finished.";
 
 
 // ** P2P.asp **//
-var p2p = new Object();
+
 p2p.titl="Peer-to-Peer Apps";
 p2p.h2="BitTorrent Client";
@@ -679,10 +679,10 @@
 
 //help container
-//var hp2p = new Object();
+
 //hpp2p.right2="Certain applications may require to open specific ports in order for it to function correctly. Examples of these applications include servers and certain online games. When a request for a certain port comes in from the Internet, the router will route the data to the computer you specify. Due to security concerns, you may want to limit port forwarding to only those ports you are using, and uncheck the <em>" + share.enable +"</em> checkbox after you are finished.";
 
 
 // ** ForwardSpec.asp **//
-var pforward = new Object();
+
 pforward.titl="Port Forwarding";
 pforward.h2="Port Forward";
@@ -694,9 +694,9 @@
 
 //help container
-var hpforward = new Object();
+
 hpforward.right2="Certain applications may require to open specific ports in order for it to function correctly. Examples of these applications include servers and certain online games. When a request for a certain port comes in from the Internet, the router will route the data to the computer you specify. Due to security concerns, you may want to limit port forwarding to only those ports you are using, and uncheck the <em>Enable</em> checkbox after you are finished.";
 
 // ** USB.asp **//
-var usb = new Object();
+
 usb.titl="USB";
 usb.usb_legend="USB Support";
@@ -714,5 +714,5 @@
 
 // ** NAS.asp **//
-var nas = new Object();
+
 nas.titl="NAS";
 nas.proftpd_legend="FTP Server";
@@ -726,9 +726,9 @@
 nas.samba3_legend="File Sharing";
 
-var hnas = new Object();
+
 hnas.right2="User Password List: Enter one User Password per line. Password can be plain text or MD5 crypt.";
 
 // ** Hotspot.asp **//
-var hotspot = new Object();
+
 hotspot.titl="Hotspot";
 hotspot.h2="Hotspot Portal";
@@ -809,5 +809,5 @@
 
 // ** Hotspotsystem **//
-var hotspotsys = new Object();
+
 hotspotsys.legend="Hotspot System";
 hotspotsys.nobridge="Separate Wifi from LAN Bridge";
@@ -823,5 +823,5 @@
 hotspotsys.customsplash="Custom Splash Page (Walled Garden)";
 
-var anchorfree = new Object();
+
 anchorfree.anchorfree="AnchorFree";
 anchorfree.titl="My Ad Network";
@@ -849,5 +849,5 @@
 anchorfree.validterms="You must agree to the terms & conditions!";
 
-var hanchorfree = new Object();
+
 hanchorfree.right1="Join AnchorFree's hotspot advertising network";
 hanchorfree.right2="AnchorFree operates a hotspot advertising network allowing DD-WRT customers to generate incremental revenues.";
@@ -862,5 +862,5 @@
 
 // ** Info.htm **//
-var info = new Object();
+
 info.titl="Info";
 info.h2="System Information";
@@ -871,5 +871,5 @@
 
 // ** index_heartbeat.asp **//
-var idx_h = new Object();
+
 idx_h.srv="Heart Beat Server";
 idx_h.con_strgy="Connection Strategy";
@@ -880,5 +880,5 @@
 
 // ** index_l2tp.asp **//
-var idx_l = new Object();
+
 idx_l.srv="Gateway (L2TP Server)";
 idx_l.req_chap="Require CHAP";
@@ -888,10 +888,10 @@
 
 // ** index_pppoe.asp **//
-var idx_pppoe = new Object();
+
 idx_pppoe.use_rp="Use RP PPPoE";
 
 
 // ** index_pptp.asp **//
-var idx_pptp = new Object();
+
 idx_pptp.srv="Use DHCP";
 idx_pptp.wan_ip="WAN IP Address";
@@ -903,10 +903,10 @@
 
 // ** index_static.asp **//
-var idx_static = new Object();
+
 idx_static.dns="Static DNS";
 
 
 // ** index.asp **//
-var idx = new Object();
+
 idx.titl="Setup";
 idx.h2="WAN Setup";
@@ -954,5 +954,5 @@
 
 //help container
-var hidx = new Object();
+
 hidx.right2="This setting is most commonly used by Cable operators.";
 hidx.right4="Enter the host name provided by your ISP.";
@@ -968,5 +968,5 @@
 
 // ** Join.asp **//
-var join = new Object();
+
 
 //sshd.webservices
@@ -976,5 +976,5 @@
 
 // ** Log_incoming.asp **//
-var log_in = new Object();
+
 log_in.titl="Incoming Log Table";
 log_in.h2="Incoming Log Table";
@@ -984,5 +984,5 @@
 
 // ** Log_outgoing.asp **//
-var log_out = new Object();
+
 log_out.titl="Outgoing Log Table";
 log_out.h2="Outgoing Log Table";
@@ -993,5 +993,5 @@
 
 // ** Log.asp **//
-var log = new Object();
+
 log.titl="Log";
 log.h2="Log Management";
@@ -1004,5 +1004,5 @@
 
 // ** Management.asp **//
-var management = new Object();
+
 management.titl="Administration";
 management.h2="Router Management";
@@ -1093,10 +1093,10 @@
 
 //help container
-var hmanagement = new Object();
+
 hmanagement.right1="Auto-Refresh:";
 hmanagement.right2="Adjusts the Web GUI automatic refresh interval. 0 disables this feature completely.";
 
 // ************ Port_Services.asp (used by Filters.asp and QoS.asp, QOSPort_Services.asp not used anymore) *****************************************//
-var portserv = new Object();
+
 portserv.titl="Port Services";
 portserv.h2="Port Services";
@@ -1104,5 +1104,5 @@
 
 // ** Networking.asp **//
-var networking = new Object();
+
 networking.h2="VLAN Tagging";
 networking.legend="Tagging";
@@ -1118,10 +1118,10 @@
 
 //help container
-var hnetworking = new Object();
+
 hnetworking.right1="Multi DHCPD";
 hnetworking.right2="To use Multiple DHCPD enable DNSMasq as DHCP-Server";
 
 // ** QoS.asp **//
-var qos = new Object();
+
 qos.titl="Quality of Service";
 qos.h2="Quality Of Service (QoS)";
@@ -1149,5 +1149,5 @@
 
 //help container
-var hqos = new Object();
+
 hqos.right1="Uplink:";
 hqos.right2="Set this to 80%-95% (max) of your total upload limit.";
@@ -1161,5 +1161,5 @@
 
 // ** RouteTable.asp **//
-var routetbl = new Object();
+
 routetbl.titl="Routing Table";
 routetbl.h2="Routing Table Entry List";
@@ -1168,5 +1168,5 @@
 
 // ** Routing.asp **//
-var route = new Object();
+
 route.titl="Routing";
 route.h2="Advanced Routing";
@@ -1212,5 +1212,5 @@
 
 //help container
-var hroute = new Object();
+
 hroute.right2="If the router is hosting your Internet connection, select <em>Gateway</em> mode. If another router exists on your network, select <em>Router</em> mode.";
 hroute.right4="This is the unique route number, you may set up to 50 routes.";
@@ -1221,5 +1221,5 @@
 
 // ** Site_Survey.asp **//
-var survey = new Object();
+
 survey.titl="Site Survey";
 survey.h2="Neighbor&#39;s Wireless Networks";
@@ -1228,5 +1228,5 @@
 
 // ** Services.asp **//
-var service = new Object();
+
 service.titl="Services";
 service.h2="Services Management";
@@ -1318,5 +1318,5 @@
 
 //help container
-var hpppoesrv = new Object();
+
 hpppoesrv.right2="IP: 0.0.0.0; you'll serve IP's from the pool";
 
@@ -1376,5 +1376,5 @@
 
 //help container
-var hstatus_vpn = new Object();
+
 hstatus_vpn.right1="Add IPs in the form 0.0.0.0/0 to force clients to use the tunnel as default gateway. One line per IP. Redirect Gateway MUST be off.";
 hstatus_vpn.right2="To push routes to clients add \'push \"route 0.0.0.0\"\', to push DNS/WINS add \'push \"dhcp-option DNS (or WINS) 0.0.0.0\"\' to the config.";
@@ -1506,5 +1506,5 @@
 
 // ** eop-tunnel.asp **//
-var eoip = new Object();
+
 eoip.titl="EoIP Tunnel";
 eoip.tunnel="Tunnel";
@@ -1522,5 +1522,5 @@
 
 // ** Sipath.asp + cgi **//
-var sipath = new Object();
+
 sipath.titl="SiPath Overview";
 sipath.phone_titl="Phonebook";
@@ -1529,5 +1529,5 @@
 
 // ** Status_Lan.asp **//
-var status_lan = new Object();
+
 status_lan.titl="LAN Status";
 status_lan.h2="Local Network";
@@ -1543,5 +1543,5 @@
 
 //help container
-var hstatus_lan = new Object();
+
 hstatus_lan.right2="This is the Router's MAC Address, as seen on your local, Ethernet network.";
 hstatus_lan.right4="This shows the Router's IP Address, as it appears on your local, Ethernet network.";
@@ -1552,5 +1552,5 @@
 
 // ** Status_Bandwidth.asp **//
-var status_band = new Object();
+
 status_band.titl="Bandwidth Monitoring";
 status_band.h2="Bandwidth Monitoring";
@@ -1565,5 +1565,5 @@
 
 //help container
-var hstatus_band = new Object();
+
 hstatus_band.svg="The Adobe's SVG plugin is required to display bandwidth graphs.";
 hstatus_band.right1="Click the label to switch unit (bytes/s or bits/s).";
@@ -1571,5 +1571,5 @@
 
 // ** Status_Router.asp **//
-var status_router = new Object();
+
 status_router.titl="Router Status";
 status_router.h2="Router Information";
@@ -1601,5 +1601,5 @@
 
 //help container
-var hstatus_router = new Object();
+
 hstatus_router.right2="This is the specific name for the router, which you set on the <i>Setup</i> tab.";
 hstatus_router.right4="This is the router's MAC Address, as seen by your ISP.";
@@ -1610,5 +1610,5 @@
 
 // ** Status_Internet.asp **//
-var status_inet = new Object();
+
 status_inet.titl="WAN Status";
 status_inet.h11="WAN";
@@ -1629,5 +1629,5 @@
 
 //help container
-var hstatus_inet = new Object();
+
 hstatus_inet.right2="This shows the information required by your ISP for connection to the Internet. This information was entered on the Setup Tab. You can <em>Connect</em> or <em>Disconnect</em> your connection here by clicking on that button.";
 hstatus_inet.right4="This shows your router's Internet traffic since last reboot.";
@@ -1636,5 +1636,5 @@
 
 // ** Status_Conntrack.asp **//
-var status_conn = new Object();
+
 status_conn.titl="Active IP Connections Table";
 status_conn.h2="Active IP Connections";
@@ -1642,5 +1642,5 @@
 
 // ** Status_SputnikAPD.asp **//
-var status_sputnik = new Object();
+
 status_sputnik.titl="Sputnik Agent Status";
 status_sputnik.h2="Sputnik&reg; Agent&trade;";
@@ -1649,5 +1649,5 @@
 
 //help container
-var hstatus_sputnik = new Object();
+
 hstatus_sputnik.right1="Sputnik Agent Status";
 hstatus_sputnik.right2="This screen displays the status of the Sputnik Agent process.";
@@ -1658,5 +1658,5 @@
 
 // ** Status_Wireless.asp **//
-var status_wireless = new Object();
+
 status_wireless.titl="Wireless Status";
 status_wireless.h2="Wireless";
@@ -1673,5 +1673,5 @@
 
 // ** GPS info **//
-var status_gpsi = new Object();
+
 status_gpsi.legend="GPS Info";
 status_gpsi.status="Status";
@@ -1682,5 +1682,5 @@
 
 //help container
-var hstatus_wireless = new Object();
+
 hstatus_wireless.right2="This is the Router's MAC Address, as seen on your local, wireless network.";
 hstatus_wireless.right4="As selected from the Wireless tab, this will display the wireless mode (Mixed, G-Only, B-Only or Disabled) used by the network.";
@@ -1688,10 +1688,10 @@
 
 // ** Status_OpenVPN.asp **//
-var status_openvpn = new Object();
+
 status_openvpn.titl="OpenVPN Status";
 
 
 // ** Triggering.asp **//
-var trforward = new Object();
+
 trforward.titl="Port Triggering";
 trforward.h2="Port Triggering";
@@ -1702,5 +1702,5 @@
 
 //help container
-var htrforward = new Object();
+
 htrforward.right2="Enter the application name of the trigger.";
 htrforward.right4="For each application, list the triggered port number range. Check with the Internet application documentation for the port number(s) needed.";
@@ -1711,5 +1711,5 @@
 
 // ** Upgrade.asp **//
-var upgrad = new Object();
+
 upgrad.titl="Firmware Upgrade";
 upgrad.h2="Firmware Management";
@@ -1723,10 +1723,10 @@
 
 //help container
-var hupgrad = new Object();
+
 hupgrad.right2="Click on the <em>Browse...</em> button to select the firmware file to be uploaded to the router.<br /><br /> Click the <em>Upgrade</em> button to begin the upgrade process. Upgrade must not be interrupted.";
 
 
 // ** UPnP.asp **//
-var upnp = new Object();
+
 upnp.titl="UPnP";
 upnp.h2="Universal Plug and Play (UPnP)";
@@ -1740,5 +1740,5 @@
 
 //help container
-var hupnp = new Object();
+
 hupnp.right2="Click the trash can to delete an individual entry.";
 hupnp.right4="Allows applications to automatically setup port forwardings.";
@@ -1746,5 +1746,5 @@
 
 // ** VPN.asp **//
-var vpn = new Object();
+
 vpn.titl="VPN Passthrough";
 vpn.h2="Virtual Private Network (VPN)";
@@ -1755,10 +1755,10 @@
 
 //help container
-var hvpn = new Object();
+
 hvpn.right1="You may choose to enable IPSec, PPTP and/or L2TP passthrough to allow your network devices to communicate via VPN.";
 
 
 // ** Vlan.asp **//
-var vlan = new Object();
+
 vlan.titl="Virtual LAN";
 vlan.h2="Virtual Local Area Network (VLAN)";
@@ -1772,5 +1772,5 @@
 
 // ** WEP.asp **//
-var wep = new Object();
+
 wep.defkey="Default Transmit Key";
 wep.passphrase="Passphrase";
@@ -1778,5 +1778,5 @@
 
 // ** WOL.asp **//
-var wol = new Object();
+
 wol.titl="WOL";
 wol.h2="Wake-On-LAN";
@@ -1796,5 +1796,5 @@
 
 //help container
-var hwol = new Object();
+
 hwol.right2="This page allows you to <em>Wake Up</em> hosts on your local network (i.e. locally connected to your router). You can manually wake up hosts by clicking the <em>"+sbutton.wol+"</em> or you can program an automatic schedule wake up thanks to the "+wol.srv+".";
 hwol.right4="MAC Address(es) are entered in the format xx:xx:xx:xx:xx:xx (i.e. 01:23:45:67:89:AB) and must be separated by a <em>SPACE</em>";
@@ -1803,5 +1803,5 @@
 
 // ** WanMAC.asp **//
-var wanmac = new Object();
+
 wanmac.titl="MAC Address Clone";
 wanmac.h2="MAC Address Clone";
@@ -1811,10 +1811,10 @@
 
 //help container
-var hwanmac = new Object();
+
 hwanmac.right2="Some ISPs will require you to register your MAC address. If you do not wish to re-register your MAC address, you can have the router clone the MAC address that is registered with your ISP.";
 
 
 // ** WL_WPATable.asp / WPA.asp / Radius.asp **//
-var wpa = new Object();
+
 wpa.titl="Wireless Security";
 wpa.h2="Wireless Security";
@@ -1833,5 +1833,5 @@
 
 
-var aoss = new Object();
+
 aoss.titl="AOSS Security";
 aoss.aoss="AOSS";
@@ -1863,5 +1863,5 @@
 aoss.release="Release";
 
-var olupgrade = new Object();
+
 olupgrade.avail_updates="Available Updates";
 olupgrade.version="Version";
@@ -1871,5 +1871,5 @@
 olupgrade.retrieve_error="Error retrieving update information";
 
-var nintendo = new Object();
+
 nintendo.titl="Nintendo";
 nintendo.spotpass = new Object();
@@ -1878,5 +1878,5 @@
 nintendo.spotpass.servers="Allow Servers";
 
-var sec80211x = new Object();
+
 sec80211x.xsuptype="XSupplicant Type";
 sec80211x.servercertif="Public Server Certificate";
@@ -1887,10 +1887,10 @@
 
 //help container
-var hwpa = new Object();
+
 hwpa.right2="You may choose from Disable, WEP, WPA Personal, WPA Enterprise, or RADIUS. All devices on your network must use the same security mode. With N-Mode you must use WPA2/AES";
 
 
 // ** WL_FilterTable.asp **//
-var wl_filter = new Object();
+
 wl_filter.titl="MAC Address Filter List";
 wl_filter.h2="MAC Address Filter List";
@@ -1900,5 +1900,5 @@
 
 // ** WL_ActiveTable.asp **//
-var wl_active = new Object();
+
 wl_active.titl="Wireless Active Client MAC List";
 wl_active.h2="Wireless Client MAC List";
@@ -1909,5 +1909,5 @@
 
 // ** Wireless_WDS.asp **//
-var wds = new Object();
+
 wds.titl="WDS";
 wds.h2="Wireless Distribution System";
@@ -1924,5 +1924,5 @@
 
 // ** Wireless_radauth.asp **//
-var radius = new Object();
+
 radius.titl="Radius";
 radius.h2="Remote Authentication Dial-In User Service";
@@ -1947,5 +1947,5 @@
 
 // ** Wireless_MAC.asp **//
-var wl_mac = new Object();
+
 wl_mac.titl="MAC Filter";
 wl_mac.h2="Wireless MAC Filter";
@@ -1957,5 +1957,5 @@
 
 // ** WiMAX
-var wl_wimax = new Object();
+
 wl_wimax.titl="WiMAX";
 wl_wimax.h2="Worldwide Interoperability for Microwave Access";
@@ -1968,5 +1968,5 @@
 
 // ** Gpio **//
-var gpio = new Object();
+
 gpio.titl="Gpio Inputs / Outputs";
 gpio.h2="Gpio Inputs / Outputs";
@@ -1975,5 +1975,5 @@
 
 // ** FreeRadius.asp **//
-var freeradius = new Object();
+
 freeradius.titl="FreeRadius";
 freeradius.h2="FreeRadius";
@@ -2004,9 +2004,9 @@
 
 //help container
-var hfreeradius = new Object();
+
 hfreeradius.right2="You must enable JFFS before starting FreeRadius.";
 
 // ** Wireless_Advanced.asp **//
-var wl_adv = new Object();
+
 wl_adv.titl="Advanced Wireless Settings";
 wl_adv.h2="Advanced Wireless Settings";
@@ -2072,9 +2072,9 @@
 
 //help container
-var hwl_adv = new Object();
+
 hwl_adv.right2="You may choose from Auto or Shared Key. Shared key authentication is more secure, but all devices on your network must also support Shared Key authentication.";
 
 // ** Wireless_Basic.asp **//
-var wl_basic = new Object();
+
 wl_basic.titl="Wireless";
 wl_basic.h2="Wireless";
@@ -2169,5 +2169,5 @@
 
 //help container
-var hwl_basic = new Object();
+
 hwl_basic.right2="If you wish to exclude Wireless-G clients, choose <em>B-Only</em> mode. If you would like to disable wireless access, choose <em>Disable</em>.<br/><b>Note :</b> when changing wireless mode, some advanced parameters are succeptible to be modified (\"" + wl_adv.label16 + "\", \"" + wl_adv.label2 + "\" or \"" + wl_adv.label5 + "\").";
 hwl_basic.right3="Sensitivity Range: ";
@@ -2176,5 +2176,5 @@
 
 // ** Fail_s.asp / Fail_u_s.asp / Fail.asp **//
-var fail = new Object();
+
 fail.mess1="The values you entered are invalid. Please try again.";
 fail.mess2="Upgrade failed.";
@@ -2182,5 +2182,5 @@
 
 // ** Success*.asp / Reboot.asp  **//
-var success = new Object();
+
 success.saved="Settings saved.";
 success.restore="Settings restored.<br/>Unit is rebooting now. Please wait a moment...";
@@ -2195,9 +2195,9 @@
 
 // ** Logout.asp  **//
-var logout = new Object();
+
 logout.message="You have successfully logged out.<br />Thank you for using DD-WRT !";
 
 // ** Setup Assistant **//
-var sas = new Object();
+
 sas.title="Setup Assistant";
 sas.internet_connection="Internet Connection";
@@ -2207,5 +2207,5 @@
 sas.hwan="Internet (WAN) Setup";
 
-var hsas = new Object();
+
 hsas.wan="The WAN interface connects your router to the Internet or other networks. If your network is connected to the internet and you only need an access point then set the WAN mode to \"Disabled\".";
 hsas.h_routerip="Router IP";
@@ -2224,5 +2224,5 @@
 
 // ** AOSS **//
-var haoss = new Object();
+
 haoss.basic="The \"AirStation One-Touch Secure System\" (AOSS) allows you to connect AOSS capable clients to your access point without requiring manual configuration.";
 haoss.securitymodes="The AOSS Security Modes define what client security modes are accepted for AOSS negotiation. If a Client only supports security modes that are not enabled it cannot connect.";
@@ -2230,5 +2230,5 @@
 // ************		OLD PAGES 		*******************************//
 // *********************** DHCPTable.asp *****************************//
-var dhcp = new Object();
+
 dhcp.titl="DHCP Tabela Aktywnych IP";
 dhcp.h2="DHCP Tabela Aktywnych IP";
@@ -2236,4 +2236,4 @@
 dhcp.tclient="Nazwa Klienta Hosta";
 
-var donate = new Object();
+
 donate.mb="Możesz także oddać darowiznę przez Moneybookers na konto mb@dd-wrt.com";