Changeset 19320


Ignore:
Timestamp:
06/05/12 02:02:55 (12 months ago)
Author:
BrainSlayer
Message:

mr3240 support

Location:
src/router
Files:
5 edited

Legend:

Unmodified
Added
Removed

  • src/router/Makefile.pb42

    r19284 r19320  
    194194ifeq ($(CONFIG_WR741),y) 
    195195        cp $(LINUXDIR)/.config_wr741 $(LINUXDIR)/.config 
     196endif 
     197ifeq ($(CONFIG_MR3240),y) 
     198        cp $(LINUXDIR)/.config_mr3240 $(LINUXDIR)/.config 
    196199endif 
    197200ifeq ($(CONFIG_WR842),y) 
    … …  
    10581061        -./tools/trx_n -m 40000000 -o $(ARCH)-uclibc/WR841NDv7-firmware.bin mips-uclibc/tplink-WR841NDv7-firmware.bin 
    10591062 
     1063        -./tools/tplink/mktplinkfw -B TL-MR3240 -N DD-WRT -V 24 -k $(ARCH)-uclibc/vmlinus.gzip -r $(ARCH)-uclibc/root.fs -o mips-uclibc/tplink-MR3240-firmware.bin 
     1064        -./tools/trx_n -m 40000000 -o $(ARCH)-uclibc/MR3240-firmware.bin mips-uclibc/tplink-MR3240-firmware.bin 
     1065 
    10601066        -./tools/tplink/mktplinkfw -B RNX-N300RT -N DD-WRT -V 24 -k $(ARCH)-uclibc/vmlinus.gzip -r $(ARCH)-uclibc/root.fs -o mips-uclibc/rosewill-RNX-N300RT-firmware.bin 
    10611067        -./tools/trx_n -m 40000000 -o $(ARCH)-uclibc/RNX-N300RT-firmware.bin mips-uclibc/rosewill-RNX-N300RT-firmware.bin 

  • src/router/libutils/Makefile

    r19256 r19320  
    832832CFLAGS += -DHAVE_WR841v7 
    833833endif 
     834ifeq ($(CONFIG_MR3240),y) 
     835CFLAGS += -DHAVE_MR3240 
     836endif 
    834837ifeq ($(CONFIG_WR842),y) 
    835838CFLAGS += -DHAVE_WR842 

  • src/router/libutils/utils.c

    r19308 r19320  
    18751875        nvram_default_get("ath0_txantenna", "3"); 
    18761876        setRouter("TP-Link TL-WR840N v1"); 
     1877        return ROUTER_BOARD_PB42; 
     1878#elif HAVE_MR3240 
     1879        nvram_default_get("ath0_rxantenna", "3"); 
     1880        nvram_default_get("ath0_txantenna", "3"); 
     1881        setRouter("TP-Link TL-MR3240"); 
    18771882        return ROUTER_BOARD_PB42; 
    18781883#elif HAVE_WR841v7 
    … …  
    40124017                sec0_gpio = 0x001; 
    40134018 
     4019#elif HAVE_MR3240 
     4020                diag_gpio = 0x101; 
     4021                connected_gpio = 0x108; 
     4022                usb_power = 0x006 
    40144023#elif HAVE_WR741 
    40154024                diag_gpio = 0x101; 

  • src/router/services/Makefile

    r19257 r19320  
    306306ifeq ($(CONFIG_WR841v7),y) 
    307307CFLAGS_EXTRA += -DHAVE_WR841v7 
     308endif 
     309ifeq ($(CONFIG_MR3240),y) 
     310CFLAGS_EXTRA += -DHAVE_MR3240 
    308311endif 
    309312ifeq ($(CONFIG_WR741),y) 

  • src/router/services/sysinit/sysinit-wr741.c

    r18953 r19320  
    153153#endif 
    154154        //enable wlan led (card gpio based) 
    155 #if defined(HAVE_WR841v7) || defined(HAVE_WR842) 
     155#if defined(HAVE_WR841v7) || defined(HAVE_WR842) || defined(HAVE_MR3240) 
    156156        setWirelessLedPhy0(0); 
    157157#else 
Note: See TracChangeset for help on using the changeset viewer.