Opened 3 years ago

Closed 10 months ago

#1410 closed (fixed)

Buffalo WZR-G300N - Wireless LED not working

Reported by: Kaltsu Owned by: somebody
Keywords: wzr-g300n, wireless, led Cc:

Description (last modified by Kaltsu)

The wireless LED on WZR-G300N's front panel does not function even though the wireless radio is turned on. Tested with build 13972.

Also performed a gpio test with the following results:

gpio disable 0 - All WAN/LAN port LEDs on
gpio disable 1 - BRIDGE LED on
gpio disable 2 - No visual effect
gpio disable 3 - No visual effect
gpio disable 4 - No visual effect
gpio disable 5 - No visual effect
gpio disable 6 - AOSS LED on
gpio disable 7 - DIAG LED on
gpio disable 8 - No visual effect

gpio enable 0 - All WAN/LAN port LEDs off
gpio enable 1 - BRIDGE LED off
gpio enable 2 - No visual effect
gpio enable 3 - No visual effect
gpio enable 4 - Reboots/resets the router to default settings
gpio enable 5 - No visual effect
gpio enable 6 - AOSS LED off
gpio enable 7 - DIAG LED off
gpio enable 8 - No visual effect

Also attached a picture which is hopefully brings some help.

Attachments (1)

WZR-G300N_leds.jpg​ (236.3 KB) - added by Kaltsu 3 years ago.

Download all attachments as: .zip

Change History (4)

comment:1 Changed 3 years ago by Kaltsu

  • Description modified (diff)

Changed 3 years ago by Kaltsu

comment:2 Changed 3 years ago by Kaltsu

  • Description modified (diff)

comment:3 Changed 10 months ago by LOM

  • Resolution set to fixed
  • Status changed from new to closed

Prolly solved with the ath9k driver

Note: See TracTickets for help on using tickets.