Linksys WRT600N version 1.1 Bug List

[GrahamJW]

-wireless mac not transferred from mac filter list when checkbox is applied -wide channel not working (no option for any channel) -wireless mac address incorrect in info tab (showing same as WAN MAC) -wireless mac address clone does not work -wiviz not working -Wide channel selection not working -N only mode results in -2 undefined channel when 40MHz option is selected -changes on wireless tab result in connection drop on WAN port -channel settings incorrectly reported (shows 36 or 54 when channel 60 is selected for example on wireless info tab), the 2.4GHz security LED does not light up when the 2.4GHz channel is secured. -PWR LED flashes -the USB status activity is shown on the 5.8GHz security LED and it turns amber, and the USB LED randomly flashes (not sure what activity it is showing).

[BrainSlayer]

it seems that you're not using the latest version we provide in our internal folder at others/eko/brainslayer-presp2

[GrahamJW]

Sorry, should have mentioned the version I have loaded:

DD-WRT v24-sp2 (01/02/09) mega - build 11296

The LED issue has been present in all supported versions, and the wide channel selection problems have been present since EKO version dd-wrt.v24-10431.

[BrainSlayer]

eko's version doesnt matter here. its not a official build. wide channel is also almost not selectable since you dont have many channels in 2.4

the wireless mac however is correct. its shown as its stored in the router. it might be different from linksys. but we dont need to be like linksys. since wireless is bridged per default to lan, the mac address must be identical. if you set it up as a client its different.

wiviz works here. consider to select the correct interface on the status->wireless page

channel selection in 5 ghz is something different. consider that 5 ghz is forced to auto selection due the FCC / ETSI regulation

[GrahamJW]

Okay...thanks BrainSlayer?....will the LED issue be fixed for the final SP2 release on the WRT600N? Also, with Linksys stock firmware I am able to connect at 270 Mbps on the 5GHz radio (setting everying to auto). With dd-wrt, I can only obtain 135Mpbs in the last few builds (experimented with different channels). I still can't get wiviz to work, I just see dots flying around. I couldn't find any option to select the correct interface on the status->wirless page.