WRT600N v1.1 bugs build 11361
|Reported by:||macgyver||Owned by:||somebody|
Description (last modified by macgyver)
Found something interesting here...with all builds since 10431, on a cold boot the router would not connect higher than 135mbps; now it does work...but here's the catch! Set all your channel settings on 'auto', and set WL1 (5GHz) to 'N only'. ack timing set to 1000 meters tx power 84mw cts protection disabled frame burst enabled afterburner disabled I have rebooted and unplugged router, getting solid 270 now but let's see how long it lasts
Edit: upon further testing I have found that it only SHOWS 270 until a client actually connects, then it drops down to 135mbps. The workaround is the same as previous builds (NA only, 40MHz, channel 60, save first then apply) On cold boot router will not go higher than 130mbps max with connected clients...still Only way to get back to 270 after cold boot/reboot is by doing workaround.
STILL locks into channel 36 or 54...have never seen anything other than those 2....channel 36 guaranteed NO 270mbps support
Wiviz does not work at all (dots fly around the screen but that's it) 5GHz mode should not have B or G modes as options; A and N are the only ones that use 5GHz