redboot.cdl

Revision 12368, 52.6 kB (checked in by BrainSlayer, 5 months ago)
tftp server added, supports wiligear, ubiquiti and dd-wrt webflash format

Line
1	# ====================================================================
2	#
3	# redboot.cdl
4	#
5	# Redboot package configuration data
6	#
7	# ====================================================================
8	#####ECOSGPLCOPYRIGHTBEGIN####
9	## -------------------------------------------
10	## This file is part of eCos, the Embedded Configurable Operating System.
11	## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
12	## Copyright (C) 2002, 2003, 2004 Gary Thomas
13	##
14	## eCos is free software; you can redistribute it and/or modify it under
15	## the terms of the GNU General Public License as published by the Free
16	## Software Foundation; either version 2 or (at your option) any later version.
17	##
18	## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19	## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20	## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
21	## for more details.
22	##
23	## You should have received a copy of the GNU General Public License along
24	## with eCos; if not, write to the Free Software Foundation, Inc.,
25	## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
26	##
27	## As a special exception, if other files instantiate templates or use macros
28	## or inline functions from this file, or you compile this file and link it
29	## with other works to produce a work based on this file, this file does not
30	## by itself cause the resulting work to be covered by the GNU General Public
31	## License. However the source code for this file must still be made available
32	## in accordance with section (3) of the GNU General Public License.
33	##
34	## This exception does not invalidate any other reasons why a work based on
35	## this file might be covered by the GNU General Public License.
36	##
37	## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38	## at http://sources.redhat.com/ecos/ecos-license/
39	## -------------------------------------------
40	#####ECOSGPLCOPYRIGHTEND####
41	# ====================================================================
42	######DESCRIPTIONBEGIN####
43	#
44	# Author(s): gthomas
45	# Original data: gthomas
46	# Contributors: Philippe Robin, Andrew Lunn, tkoeller
47	# Date: 2000-05-01
48	#
49	#####DESCRIPTIONEND####
50	#
51	# ====================================================================
52	cdl_package CYGPKG_REDBOOT {
53	display "Redboot ROM monitor"
54	doc ref/redboot.html
55	define_header redboot.h
56	description "
57	This package supports the Redboot \[stand-alone debug monitor\]
58	using eCos as the underlying board support mechanism."
59
60	# Use of separate interrupt stack causes problems when running
61	# programs as they can end up trashing RedBoot's stack
62	requires { CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0 }
63
64	# Since the CYGDAT_REDBOOT_CONSOLE_DEV setting ends up in the platform
65	# HAL header, we need to include that here (via hal.h).
66	define_proc {
67	puts $::cdl_header "#include <pkgconf/hal.h>"
68	}
69
70	cdl_component CYGSEM_REDBOOT_ELF {
71	flavor bool
72	display "Include support for ELF file format"
73	default_value 1
74
75	cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
76	display "Use the virtual address in the ELF headers"
77	flavor bool
78	default_value 0
79	description "
80	The ELF headers contain both a virtual and a physical address
81	for where code/data should be loaded. By default the physical
82	address is used but sometimes it is necassary to use the
83	virtual address because of bugy toolchains"
84	}
85	}
86
87
88	cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
89	display "Methods of loading images using redboot"
90	}
91
92	cdl_component CYGBLD_BUILD_REDBOOT {
93	display "Build Redboot ROM ELF image"
94	default_value 0
95	requires CYGPKG_INFRA
96	requires CYGPKG_ISOINFRA
97
98	requires ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
99	requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
100	requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
101	requires CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
102
103	requires CYGINT_ISO_STRING_MEMFUNCS
104	requires CYGINT_ISO_STRING_STRFUNCS
105	requires CYGINT_REDBOOT_LOAD_METHOD
106
107	cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
108	display "Include GDB support in RedBoot"
109	no_define
110	default_value 0
111	active_if CYGINT_HAL_DEBUG_GDB_STUBS
112	requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
113	requires CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
114	description "
115	RedBoot normally includes support for the GDB debugging protocols.
116	This option allows this to be disabled which may yield a substantial
117	savings in terms of code and memory usage by RedBoot."
118	}
119
120	cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
121	display "Threads debugging support"
122	no_define
123	description "
124	Enabling this option will include special code in the GDB stubs to
125	support debugging of threaded programs. In the case of eCos programs,
126	this support allows GDB to have complete access to the eCos threads
127	in the program."
128	active_if { CYG_HAL_STARTUP != "RAM" }
129	requires CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
130	}
131
132	cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
133	display "Customized version string"
134	flavor booldata
135	default_value 0
136	description "
137	Use this option to define a customized version \"string\" for
138	RedBoot. Note: this value is only cosmetic, displayed by the
139	\"version\" command, but is useful for providing site specific
140	information about the RedBoot configuration."
141	}
142
143	cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
144	display "Enable command line editing"
145	flavor data
146	default_value 16
147	description "
148	If this option is non-zero, RedBoot will remember the last N command
149	lines. These lines may be reused. Enabling this history will also
150	enable rudimentary editting of the lines themselves."
151	}
152
153	cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
154	display "Enable history command and expansion"
155	requires { CYGNUM_REDBOOT_CMD_LINE_EDITING > 0 }
156	flavor bool
157	default_value 1
158	description "
159	Enabling this option will allow RedBoot to provide a history command
160	to list previous commands. Also enables history expansion via '!'
161	character similar to bash shell."
162	}
163
164	cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
165	display "Number of unique RAM segments on platform"
166	flavor data
167	default_value 1
168	description "
169	Change this option to be the number of memory segments which are
170	supported by the platform. If the value is greater than 1, then
171	a platform specific function must provide information about the
172	additional segments."
173	}
174
175	cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
176	display "Include support gzip/zlib decompression"
177	active_if CYGPKG_COMPRESS_ZLIB
178	default_value 0
179	implements CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC
180	compile decompress.c
181
182	cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
183	display "Size of zlib decompression buffer"
184	flavor data
185	default_value 64
186	legal_values 5 to 256
187	description "
188	This is the size of the buffer filled with incoming data
189	during load before calls are made to the decompressor
190	function. For ethernet downloads this can be made bigger
191	(at the cost of memory), but for serial downloads on slow
192	processors it may be necessary to reduce the size to
193	avoid serial overruns. zlib appears to bail out if less than
194	five bytes are available initially so this is the minimum."
195	}
196
197	cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
198	display "Support compression of Flash images"
199	active_if CYGPKG_REDBOOT_FLASH
200	active_if !CYGSEM_IO_FLASH_READ_INDIRECT
201	calculated 1
202	description "
203	This CDL indicates whether flash images can
204	be decompressed from gzip/zlib format into RAM."
205	}
206	}
207
208	cdl_option CYGPRI_REDBOOT_7ZIP_FLASH {
209	display "Support 7zip compression of Flash images"
210	active_if CYGPKG_REDBOOT_FLASH
211	active_if !CYGSEM_IO_FLASH_READ_INDIRECT
212	calculated 1
213	description "
214	This CDL indicates whether flash images can
215	be decompressed from 7zip format into RAM."
216	}
217
218	cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
219	display "Include support for xyzModem downloads"
220	doc ref/download-command.html
221	no_define
222	default_value 0
223	implements CYGINT_REDBOOT_LOAD_METHOD
224	compile -library=libextras.a xyzModem.c
225	}
226
227	cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
228	display "Include POSIX checksum command"
229	doc ref/cksum-command.html
230	default_value 0
231	compile -library=libextras.a cksum.c
232	}
233
234	cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
235	display "Include memory fill command"
236	doc ref/mfill-command.html
237	default_value 0
238	compile -library=libextras.a mfill.c
239	}
240
241	cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
242	display "Include memory compare command"
243	doc ref/mcmp-command.html
244	default_value 0
245	compile -library=libextras.a mcmp.c
246	}
247
248	cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
249	display "Include memory copy command"
250	doc ref/mcopy-command.html
251	default_value 0
252	compile -library=libextras.a mcopy.c
253	}
254
255	cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
256	display "Include memory dump command"
257	doc ref/dump-command.html
258	default_value 0
259	compile -library=libextras.a dump.c
260	}
261
262	cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
263	display "Include cache command"
264	doc ref/cache-command.html
265	default_value 1
266	compile -library=libextras.a caches.c
267	}
268
269	cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
270	display "Include exec command"
271	doc ref/exec-command.html
272	default_value 1
273	# Implemented within the platform HAL
274	}
275
276	no_define
277	description "This option enables the building of the Redboot ELF image.
278	The image may require further relocation or symbol
279	stripping before being converted to a binary image.
280	This is handled by a rule in the target CDL."
281
282
283	cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
284	display "Granularity of timer/ticks"
285	flavor data
286	legal_values { 50 100 250 500 1000 }
287	default_value 250
288	description "
289	This option controls the granularity of the timers.
290	Faster CPUs can afford higher granularity (lower values)
291	which should give higher network performance since the stack
292	is purely polled."
293	}
294
295	compile main.c
296	compile misc_funs.c io.c parse.c ticks.c syscall.c alias.c
297	compile -library=libextras.a load.c
298
299	make -priority 320 {
300	<PREFIX>/bin/redboot.elf : $(PREFIX)/lib/target.ld $(PREFIX)/lib/vectors.o $(PREFIX)/lib/libtarget.a $(PREFIX)/lib/libextras.a
301	@sh -c "mkdir -p $(dir $@)"
302	$(CC) -c $(INCLUDE_PATH) $(CFLAGS) -o $(PREFIX)/lib/version.o $(REPOSITORY)/$(PACKAGE)/src/version.c
303	$(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o $@ $(PREFIX)/lib/version.o
304	}
305
306	cdl_component CYGPKG_REDBOOT_NETWORKING {
307	display "Redboot Networking"
308	flavor bool
309	active_if CYGPKG_IO_ETH_DRIVERS
310	default_value 1
311	implements CYGINT_REDBOOT_LOAD_METHOD
312	compile net/udp.c net/ip.c net/pktbuf.c net/cksum.c
313	compile net/enet.c net/icmp.c net/tcp.c net/timers.c net/arp.c
314	compile net/inet_addr.c
315	compile -library=libextras.a net/net_io.c
316	description "This option includes networking support in RedBoot."
317	define_proc {
318	puts $::cdl_system_header "#define CYGNUM_HAL_VIRTUAL_VECTOR_AUX_CHANNELS 1"
319	}
320
321	cdl_option CYGDBG_REDBOOT_NET_DEBUG {
322	display "Print net debug information"
323	flavor bool
324	default_value 0
325	description "
326	This option is overriden by the configuration stored in flash."
327	}
328
329	cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
330	display "Support TFTP for download"
331	flavor bool
332	default_value 1
333	compile -library=libextras.a net/tftp_client.c
334	description "
335	This option enables the use of the TFTP protocol for download"
336	}
337
338	cdl_option CYGSEM_REDBOOT_NET_TFTP_SERVER {
339	display "Support TFTP server with WILIBOX fwupdate support"
340	flavor bool
341	default_value 1
342	compile -library=libextras.a net/tftp_server.c net/fwupgrade.c net/fwupgrade_ubnt.c net/fwupgrade_wili.c
343	description "
344	This option enables the use of the TFTP server"
345	}
346
347	cdl_option CYGSEM_REDBOOT_RESCUE_MODE {
348	display "Support rescue mode"
349	flavor bool
350	default_value 1
351	requires CYGSEM_REDBOOT_NET_TFTP_SERVER
352	description "
353	This option enables the rescue mode (start tftp server)"
354	}
355
356	cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
357	display "Support HTTP for download"
358	flavor bool
359	default_value 1
360	compile -library=libextras.a net/http_client.c
361	description "
362	This option enables the use of the HTTP protocol for download"
363	}
364
365	cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
366	display "Default IP address"
367	flavor booldata
368	default_value CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : \
369	{ "192, 168, 1, 1" }
370	description "
371	This IP address is the default used by RedBoot if a BOOTP/DHCP
372	server does not respond. The numbers should be separated by
373	commas, and not dots. If an IP address is configured into
374	the Flash configuration, that will be used in preference."
375
376	cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
377	display "Do not try to use BOOTP"
378	flavor bool
379	default_value 1
380	description "
381	By default Redboot tries to use BOOTP to get an IP
382	address. If there's no BOOTP server on your network
383	use this option to avoid to wait until the
384	timeout. This option is overriden by the
385	configuration stored in flash."
386	}
387	cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
388	display "Default bootp server"
389	flavor booldata
390	default_value CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : \
391	{ "0, 0, 0, 0" }
392	description "
393	This IP address is the default server
394	address used by RedBoot if a BOOTP/DHCP
395	server does not respond. The numbers should
396	be separated by commas, and not dots. If
397	an IP address is configured into the Flash
398	configuration, that will be used in
399	preference."
400	}
401	}
402
403	cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
404	display "Use DHCP to get IP information"
405	flavor bool
406	default_value 0
407	description "
408	Use DHCP protocol to obtain pertinent IP addresses, such as
409	the client, server, gateway, etc."
410	}
411
412	cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
413	display "Use a gateway for non-local IP traffic"
414	flavor bool
415	default_value 0
416	requires CYGSEM_REDBOOT_NETWORKING_DHCP
417	description "
418	Enabling this option will allow the RedBoot networking
419	stack to use a \[single\] gateway to reach a non-local
420	IP address. If disabled, RedBoot will only be able to
421	reach nodes on the same subnet."
422
423	cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
424	display "Default gateway IP address"
425	flavor booldata
426	default_value CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : \
427	{ "0, 0, 0, 0" }
428	description "
429	This IP address is the default used by RedBoot if a BOOTP/DHCP
430	server does not respond. The numbers should be separated by
431	commas, and not dots. If an IP address is configured into
432	the Flash configuration, that will be used in preference."
433	}
434
435	cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
436	display "Default IP address mask"
437	flavor booldata
438	default_value CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : \
439	{ "255, 255, 255, 0" }
440	description "
441	This IP address mask is the default used by RedBoot if a BOOTP/DHCP
442	server does not respond. The numbers should be separated by
443	commas, and not dots. If an IP address is configured into
444	the Flash configuration, that will be used in preference."
445	}
446	}
447
448	cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
449	display "TCP port to listen for incoming connections"
450	flavor data
451	default_value 9000
452	description "
453	RedBoot will 'listen' on this port for incoming TCP connections.
454	This allows outside connections to be made to the platform, either
455	for GDB or RedBoot commands."
456	}
457
458	cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
459	display "Number of \[network\] packet buffers"
460	flavor data
461	default_value 4
462	legal_values 3 to 8
463	description "
464	RedBoot may need to buffer network data to support various connections.
465	This option allows control over the number of such buffered packets,
466	and in turn, controls the amount of memory used by RedBoot (which
467	is not available to user applications). Each packet buffer takes up
468	about 1514 bytes. Note: there is little need to make this larger
469	than the default."
470	}
471
472	cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
473	display "DNS support"
474	default_value 0
475	active_if CYGPKG_NS_DNS
476	requires !CYGPKG_NS_DNS_BUILD
477	compile net/dns.c
478	description "
479	When this option is enabled, RedBoot will be built with
480	support for DNS, allowing use of hostnames on the command
481	line."
482
483	cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
484	display "Default DNS IP"
485	flavor data
486	active_if !CYGSEM_REDBOOT_FLASH_CONFIG
487	default_value { "0.0.0.0" }
488	description "
489	This option sets the IP of the default DNS. The IP can be
490	changed at runtime as well."
491	}
492
493	cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
494	display "Timeout in DNS lookup"
495	flavor data
496	default_value 10
497	description "
498	This option sets the timeout used when looking up an
499	address via the DNS. Default is 10 seconds."
500	}
501
502	}
503
504	cdl_option CYGNUM_REDBOOT_DEFAULT_NETWORK_DEVICE {
505	display "Default network device driver"
506	flavor data
507	active_if { !CYGSEM_REDBOOT_FLASH_CONFIG && CYGHWR_NET_DRIVERS > 1 }
508	legal_values 0 to CYGHWR_NET_DRIVERS-1
509	default_value 0
510	description "
511	This is the index of the first network device driver that
512	RedBoot will try to initialize."
513	}
514
515	cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
516	display "Initialize only one net device"
517	flavor bool
518	active_if { CYGHWR_NET_DRIVERS > 1 }
519	default_value 0
520	description "
521	This option tells RedBoot to stop initializing network
522	devices when it finds the first device which is
523	successfully initialized. The default behavior causes
524	all network devices to be initialized."
525	}
526	}
527
528	cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
529	display "Allow RedBoot to use any I/O channel for its console."
530	flavor bool
531	default_value 1
532	description "
533	If this option is enabled then RedBoot will attempt to use all
534	defined serial I/O channels for its console device. Once input
535	arrives at one of these channels then the console will use only
536	that port."
537	}
538
539	cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
540	display "Allow RedBoot to adjust the baud rate on the serial console."
541	flavor bool
542	default_value 1
543	active_if CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
544	description "
545	If this option is enabled then RedBoot will support commands to set
546	and query the baud rate on the selected console."
547	}
548
549	cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
550	display "Run a platform specific startup function."
551	flavor bool
552	default_value 0
553	description "
554	If this option is enabled then RedBoot will execute a platform
555	specific startup function before entering into its command line
556	processing. This allows the platform to perform any special
557	setups before RedBoot actually starts running. Note: the entire
558	RedBoot environment will already be initialized at this point."
559	}
560
561	cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
562	display "Run a platform specific ESA validation function."
563	flavor bool
564	default_value 0
565	description "
566	If this option is enabled then RedBoot will execute a platform
567	specific function to validate an ethernet ESA. This would be
568	useful if the address must conform to standards set by the
569	hardware manufacturer, etc."
570	}
571
572	cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
573	display "Maximum command line length"
574	flavor data
575	default_value 256
576	description "
577	This option allows control over how long the CLI command line
578	should be. This space will be allocated statically
579	rather than from RedBoot's stack."
580	}
581
582	cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
583	display "Command processing idle timeout (ms)"
584	flavor data
585	default_value 10
586	description "
587	This option controls the timeout period before the
588	command processing is considered 'idle'. Making this
589	number smaller will cause idle processing to take place
590	more often, etc. The default value of 10ms is a reasonable
591	tradeoff between responsiveness and overhead."
592	}
593
594	cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
595	display "Validate RAM addresses during load"
596	flavor bool
597	default_value 1
598	description "
599	This option controls whether or not RedBoot will make sure that
600	memory being used by the \"load\" command is in fact in user RAM.
601	Leaving the option enabled makes for a safer environment, but this
602	check may not be valid on all platforms, thus the ability to
603	disable it. Disable this only with great care "
604	}
605
606	cdl_component CYGPKG_REDBOOT_FLASH {
607	display "Allow RedBoot to support FLASH programming"
608	flavor bool
609	default_value 1
610	active_if CYGHWR_IO_FLASH_DEVICE
611	description "
612	If this option is enabled then RedBoot will provide commands
613	to manage images in FLASH memory. These images can be loaded
614	into memory for execution or executed in place."
615	compile -library=libextras.a flash.c
616
617	cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
618	display "Byte order used to store info in flash."
619	flavor data
620	default_value { "NATURAL" }
621	legal_values {"NATURAL" "MSBFIRST" "LSBFIRST" }
622	description "
623	This option controls the byte ordering used to store
624	the FIS directory info and flash config info."
625	}
626
627	cdl_option CYGOPT_REDBOOT_FIS {
628	display "RedBoot Flash Image System support"
629	default_value 1
630	doc ref/flash-image-system.html
631	description "
632	This option enables the Flash Image System commands
633	and support within RedBoot. If disabled, simple Flash
634	access commands such as \"fis write\" will still exist.
635	This option would be disabled for targets that need simple
636	FLASH manipulation, but do not have the need or space for
637	complete image management."
638	}
639
640	cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
641	display "Max number of chunks of free space to manage"
642	flavor booldata
643	default_value 32
644	description "
645	If this option is defined then \"fis free\" will rely on the
646	FIS directory to determine what space is free within the FLASH.
647	This option controls the maximum number of free segment which
648	can be handled (typically this number is small). If this option
649	is not enabled, the the archaic behaviour of actually scanning
650	the FLASH for erased sectors (unreliable) will be used to
651	determine what's free and what's not."
652	}
653
654	cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
655	display "Flash Image System default directory contents"
656	active_if CYGOPT_REDBOOT_FIS
657	calculated 1
658
659	cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
660	display "Flash block containing the Directory"
661	flavor data
662	default_value (-1)
663	description "
664	Which block of flash should hold the directory
665	information. Positive numbers are absolute block numbers.
666	Negative block numbers count backwards from the last block.
667	eg 2 means block 2, -2 means the last but one block."
668	}
669
670	cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
671	display "Pseudo-file to describe reserved area"
672	active_if { 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE }
673	default_value 1
674	description "
675	If an area of FLASH is reserved, it is informative to
676	have a fis entry describing it. This option controls
677	creation of such an entry by default in the fis init
678	command."
679	}
680
681	cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
682	display "File to describe RedBoot boot image"
683	default_value 1
684	description "
685	Normally a ROM-startup RedBoot image is first in the
686	FLASH, and the system boots using that image. This
687	option controls creation of an entry describing it in
688	the fis init command. It might be disabled if a
689	platform has an immutable boot image of its own, where
690	we use a POST-startup RedBoot instead, which performs
691	less board initialization."
692	}
693
694	cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
695	display "File to describe RedBoot POST-compatible image"
696	default_value !CYGOPT_REDBOOT_FIS_REDBOOT
697	description "
698	This option controls creation of an entry describing a
699	POST-startup RedBoot image in the fis init command.
700	Not all platforms support POST-startup. A platform
701	might have both for testing purposes, where the
702	eventual user would substitute their own POST code for
703	the initial ROM-startup RedBoot, and then jump to the
704	POST-compatible RedBoot immediately following."
705	cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
706	display "Offset of POST image from FLASH start"
707	flavor booldata
708	default_value 0
709	requires { CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= \
710	CYGBLD_REDBOOT_FLASH_BOOT_OFFSET }
711	description "
712	This option specifies the offset for a POST image from
713	the start of FLASH. If unset, then the fis entry
714	describing the POST image will be placed where
715	convenient."
716	}
717	}
718
719	cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
720	display "File to describe RedBoot backup image"
721	default_value 0
722	description "
723	This option controls creation of an entry describing a
724	backup RedBoot image in the fis init command.
725	Conventionally a RAM-startup RedBoot image is kept
726	under this name for use in updating the ROM-based
727	RedBoot that boots the board."
728	}
729
730	cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
731	display "Include ARM SIB ID in FIS"
732	default_value 0
733	description "
734	If set, this option will cause the last 5 words of
735	the FIS to include the special ID needed for the
736	flash to be recognized as a reserved area for RedBoot
737	by an ARM BootRom monitor."
738	}
739
740	cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
741	display "Size of FIS directory entry"
742	flavor data
743	default_value 256
744	description "
745	The FIS directory is limited to one single flash
746	sector. If your flash has tiny sectors, you may wish
747	to reduce this value in order to get more slots in
748	the FIS directory."
749	}
750
751	cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
752	display "Number of FIS directory entries"
753	flavor data
754	default_value 8
755	description "
756	The FIS directory normally occupies a single flash
757	sector. Adjusting this value can allow for more than
758	one flash sector to be used, which is useful if your
759	sectors are very small."
760	}
761
762	cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
763	display "Minimum image size"
764	flavor data
765	default_value 0x20000
766	description "
767	This option controls the minimum length of images kept by
768	the FIS. In particular, it should be large enough to hold
769	the RedBoot primary image itself, as well as be a natural
770	multiple of the FLASH erase block size."
771	}
772
773	cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
774	display "Offset from start of FLASH to RedBoot boot image"
775	flavor data
776	default_value CYGNUM_REDBOOT_FLASH_RESERVED_BASE
777	requires { CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= \
778	CYGBLD_REDBOOT_FLASH_BOOT_OFFSET }
779	description "
780	This option controls where the RedBoot boot image is located
781	relative to the start of FLASH."
782	}
783
784	cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
785	display "Size of reserved area at start of FLASH"
786	flavor data
787	default_value 0
788	description "
789	This option reserves an area at the start of FLASH where RedBoot
790	will never interfere; it is expected that this area contains
791	(non-RedBoot-based) POST code or some other boot monitor that
792	executes before RedBoot."
793	}
794	}
795
796	cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
797	display "Keep all RedBoot FLASH data blocks locked."
798	flavor bool
799	default_value 1
800	active_if { CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 }
801	description "
802	When this option is enabled, RedBoot will keep configuration
803	data and the FIS directory blocks implicitly locked. While
804	this is somewhat safer, it does add overhead during updates."
805	}
806
807	cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
808	display "Use CRC checksums on FIS images."
809	flavor bool
810	default_value 0
811	description "
812	When this option is enabled, RedBoot will use CRC checksums
813	when reading and writing flash images."
814	}
815
816	cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
817	display "ARM FLASH drivers support SIB flash block structure"
818	active_if CYGPKG_HAL_ARM
819	description "This interface is implemented by a flash driver
820	to indicate that it supports the ARM SIB flash
821	block structure"
822	}
823
824	cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
825	display "Use ARM SIB flash block structure"
826	flavor bool
827	active_if CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
828	default_value 1
829	description "
830	This option is used to interpret ARM Flash System information
831	blocks."
832	}
833	}
834
835	cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
836	display "Keep RedBoot configuration data in FLASH"
837	flavor bool
838	default_value { CYGPKG_IO_FLASH != 0 }
839	compile fconfig.c
840	description "
841	When this option is enabled, RedBoot will keep configuration
842	data in a separate block of FLASH memory. This data will
843	include such items as the node IP address or startup scripts."
844
845	cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
846	display "Length of configuration data in FLASH"
847	flavor data
848	default_value 4096
849	description "
850	This option is used to control the amount of memory and FLASH
851	to be used for configuration options (persistent storage)."
852	}
853
854	cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
855	display "Style of media used for persistent data storage"
856	flavor data
857	legal_values { "FLASH" "EEPROM" }
858	default_value { "FLASH" }
859	# requires { ((CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") && CYGOPT_REDBOOT_FIS) \|\|
860	# ((CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "EEPROM") && !CYGOPT_REDBOOT_FIS) }
861	description "
862	Persistent data storage can either be held in 'norma' FLASH
863	or some other device (represented by the 'EEPROM' choice).
864	The different styles utilize different access methods."
865	}
866
867	cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
868	display "Merged config data and FIS directory"
869	flavor bool
870	active_if { CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") }
871	default_value 1
872	description "
873	If this option is set, then the FIS directory and FLASH
874	configuration database will be stored in the same physical
875	FLASH block."
876	}
877
878	cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
879	display "Which block of flash to use"
880	flavor data
881	default_value (-2)
882	description "
883	Which block of flash should hold the configuration
884	information. Positive numbers are absolute block numbers.
885	Negative block numbers count backwards from the last block.
886	eg 2 means block 2, -2 means the last but one block."
887	}
888
889	cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
890	display "Support simple macros/aliases in FLASH"
891	flavor bool
892	default_value 1
893	description "
894	This option is used to allow support for simple text-based
895	macros (aliases). These aliases are kept in the FLASH
896	configuration data (persistent storage)."
897	}
898
899	cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
900	display "Length of strings in FLASH configuration data"
901	flavor data
902	default_value 128
903	description "
904	This option is used to control the amount of memory and FLASH
905	to be used for string configuration options (persistent storage)."
906	}
907
908	cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
909	display "Length of configuration script(s) in FLASH"
910	flavor data
911	default_value 512
912	description "
913	This option is used to control the amount of memory and FLASH
914	to be used for configuration options (persistent storage)."
915	}
916
917	cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
918	display "Fallback to read-only FLASH configuration"
919	flavor bool
920	default_value { (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") }
921	description "
922	This option will cause the configuration information to
923	revert to the readonly information stored in the FLASH.
924	The option only takes effect after
925	1) the config_ok flag has been set to be true,
926	indicating that at one time the copy in RAM was valid;
927	and
928	2) the information in RAM has been verified to be invalid"
929
930	}
931	}
932
933	cdl_component CYGPKG_REDBOOT_FILEIO {
934	display "Allow RedBoot to support fileio"
935	flavor bool
936	default_value 0
937	active_if CYGPKG_IO_FILEIO
938	description "
939	If this option is enabled then RedBoot will provide commands
940	to load files from fileio file systems such as JFFS2."
941	compile -library=libextras.a fs/fileio.c
942
943	cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
944	display "Include an ls command"
945	flavor bool
946	default_value 1
947	description "
948	If this option is enabled a simple ls command will be
949	included in redboot so the contents of a directory
950	can be listed"
951	}
952	}
953
954	cdl_component CYGPKG_REDBOOT_DISK {
955	display "Allow RedBoot to support disks"
956	flavor bool
957	default_value 0
958	description "
959	If this option is enabled then RedBoot will provide commands
960	to load disk files."
961
962	cdl_option CYGSEM_REDBOOT_DISK {
963	display "Include Redboot commands for disk access"
964	default_value { CYGINT_REDBOOT_DISK_DRIVERS != 0 }
965	compile -library=libextras.a fs/disk.c
966	}
967
968	cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
969	display "Hardware drivers for disk-type devices"
970	}
971
972	cdl_option CYGNUM_REDBOOT_MAX_DISKS {
973	display "Maximum number of supported disks"
974	flavor data
975	default_value 4
976	description "
977	This option controls the number of disks supported by RedBoot."
978	}
979
980	cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
981	display "Maximum number of partitions per disk"
982	flavor data
983	default_value 8
984	description "
985	This option controls the maximum number of supported partitions per disk."
986	}
987
988	cdl_component CYGSEM_REDBOOT_DISK_IDE {
989	display "Support IDE disks."
990	flavor bool
991	default_value 1
992	active_if { CYGINT_HAL_PLF_IF_IDE != 0 }
993	description "
994	When this option is enabled, RedBoot will support IDE disks."
995	compile -library=libextras.a fs/ide.c
996	implements CYGINT_REDBOOT_DISK_DRIVERS
997
998	cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
999	display "Work with VMware virtual disks"
1000	flavor bool
1001	default_value 0
1002	description "
1003	This option controls the disk driver beaviour at ide-init"
1004	}
1005	}
1006
1007	cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
1008	display "Support Linux second extended filesystems."
1009	flavor bool
1010	default_value 0
1011	description "
1012	When this option is enabled, RedBoot will support IDE disks."
1013	compile -library=libextras.a fs/e2fs.c
1014	}
1015
1016	cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
1017	display "Support ISO9660 filesystems."
1018	flavor bool
1019	calculated 0
1020	description "
1021	When this option is enabled, RedBoot will support ISO9660 filesystems."
1022	compile -library=libextras.a fs/iso9660fs.c
1023	}
1024	}
1025
1026	cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
1027	display "Boot scripting"
1028	doc ref/persistent-state-flash.html
1029	flavor none
1030	no_define
1031	description "
1032	This contains options related to RedBoot's boot script
1033	functionality."
1034
1035	cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
1036	display "Boot scripting enabled"
1037	flavor bool
1038	active_if { CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT \|\| \
1039	CYGSEM_REDBOOT_FLASH_CONFIG }
1040	calculated 1
1041	description "
1042	This option controls whether RedBoot boot script
1043	functionality is enabled."
1044	}
1045
1046	cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
1047	display "Use default RedBoot boot script"
1048	flavor booldata
1049	default_value 0
1050	description "
1051	If enabled, this option will tell RedBoot to use the value of
1052	this option as a default boot script."
1053	}
1054
1055	cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
1056	display "Resolution (in ms) for script timeout value."
1057	flavor data
1058	default_value 1000
1059	description "
1060	This option controls the resolution of the script timeout.
1061	The value is specified in milliseconds (ms), thus to have the
1062	script timeout be defined in terms of tenths of seconds, use 100."
1063	}
1064
1065	cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
1066	display "Script default timeout value"
1067	flavor data
1068	default_value 10
1069	description "
1070	This option is used to set the default timeout for startup
1071	scripts, when they are enabled."
1072	}
1073	}
1074
1075	cdl_option CYGSEM_REDBOOT_RTC {
1076	display "Support RTC for time & date functions"
1077	active_if { CYGPKG_IO_WALLCLOCK }
1078	default_value 1
1079	description "
1080	When this option is enabled, RedBoot will support commands to
1081	query and set the real time clock (time and date)"
1082	compile -library=libextras.a time_date.cxx
1083	}
1084
1085	cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
1086	display "Behave like a ROM monitor"
1087	active_if { CYG_HAL_STARTUP == "ROM" \|\| CYG_HAL_STARTUP == "ROMRAM" }
1088	requires CYGSEM_HAL_ROM_MONITOR
1089	calculated 0
1090	no_define
1091	description "
1092	Enabling this option will allow RedBoot to provide ROM monitor-style
1093	services to programs which it executes."
1094	}
1095
1096	cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
1097	display "Allow RedBoot to handle GNUPro application 'syscalls'."
1098	flavor bool
1099	default_value 0
1100	description "
1101	If this option is enabled then RedBoot will install a syscall handler
1102	to support debugging of applications based on GNUPro newlib/bsp."
1103
1104	cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
1105	display "Support additional syscalls for 'gprof' profiling"
1106	flavor bool
1107	default_value 0
1108	active_if { 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT }
1109	description "
1110	Support additional syscalls to support a periodic callback
1111	function for histogram-style profiling, and an enquire/set
1112	of the tick rate.
1113	The application must use the GNUPro newlib facilities
1114	to set this up."
1115	}
1116
1117	cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
1118	display "Does the HAL support 'gprof' profiling?"
1119	no_define
1120	}
1121
1122	cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
1123	display "Do not raise SIGTRAP when program exits"
1124	default_value 0
1125	description "
1126	For some (single shot) newlib based programs,
1127	exiting and returning a termination status may be
1128	the normal expected behavior."
1129	}
1130	}
1131
1132	cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
1133	display "Use a common buffer for Zlib and FIS"
1134	flavor bool
1135	active_if { CYGBLD_BUILD_REDBOOT_WITH_ZLIB && \
1136	CYGOPT_REDBOOT_FIS }
1137	default_value 0
1138	description "
1139	Use a common memory buffer for both the zlib workspace
1140	and FIS directory operations. This can save a substantial
1141	amount of RAM, especially when flash sectors are large."
1142
1143	cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
1144	display "Size of Zlib/FIS common buffer"
1145	flavor data
1146	default_value 0xc000
1147	legal_values 0x4000 to 0x80000000
1148	description "
1149	Size of common buffer to allocate. Must be at least the
1150	size of one flash sector."
1151	}
1152	}
1153	cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
1154	display "Buffer size in getc when loading images"
1155	flavor data
1156	default_value { CYGPKG_REDBOOT_FILEIO ? 4096 : 256 }
1157	description "
1158	When loading images a buffer is used between redboot and the
1159	underlying storage medium, eg a filesystem, or a socket etc.
1160	The size of this buffer can have a big impart on load speed."
1161	}
1162
1163	}
1164	}
1165
1166	# EOF redboot.cdl

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format